Menjual :
- Alat Uji Laboratorium Teknik Sipil (Material Testing Equipment)
PT. MBT Utama Since 1974 adalah Produsen Laboratory / Material Testing Equipment, kami, Agent Utama produk Merk MBT, hubungi Divisi Marketing Person Deddy Sugianto HP 0818.569.876 untuk pemesanan atau Customer Service : 085.2221.77772 (24 hours) untuk informasi teknis dan pelayanan khusus lainya.
Memproduksi & Menjual Alat Lab :
• Alat Lab Teknik Sipil
• Alat Lab Mekanika Tanah / Mektan
• Alat Lab Beton / Struktur / Mortar
• Alat Lab Aspal / Asphalt Testing
• Alat Lab Jalan Raya / Highway Testing
• Alat Lab Uji Bahan
• Alat Lab Batu Bara/ Pertambangan/ Mineral/ Preparation
• Alat Lab Quality Control
• Alat Survey
• Timbangan Lab / Balance
• Design, service / maintenance, kalibrasi, alat lab
• Pelatihan Teknisi Lab & Quality Control
AGENT UTAMA / DIVISI PENJUALAN PRODUK ALAT UJI LABORATORIUM TEKNIK SIPIL (Civil Laboratory Testing Equipment) Brand MBT :
Soil Testing Equipment
Sand Cone Test, CBR Field / Laboratory, Sondir / Dutch Cone Penetrometer, Sondir Hidrolik, Compaction, Speedy Moisture, Triaxial, Penetrometer, Atterbergh Limit, Hand Bor, Hydrometer, Permeability, Standar Penetration Test, Unconfined / UCS, Consolidation, Direct Shear, Drilling Machine + SPT, Soil Compactor, etc
Aggregate Testing Equipment
Sieve – Brass/ Stainless Steel Sieves, Rotap/ Sieve Shaker, Sand Equivalent Test / Shaker, Thickness Gauge, Organic Impurities, Abrasion, Impact Test, Splitter, Bulk Density, SG - Specific Gravity etc
Cement Testing Equipment
Time of Setting / Vicat Test, Compressive Strength of Cement Mortar, Air Permeability of Porland / Fineness Device, Cube Cement, etc
Concrete Testing Equipment
Slump Test, Compression Machine, Concrete Test Hammer, Cube Mold, Cylinder Mold, Beam Mold, Air Content of Fresh Mixed, Modulus Elasticity, Compression Tension Machine, Universal Testing Machine / UTM, Calibration Anvil, Concrete Mixer, Vibrating Table, etc
Asphalt Testing Equipment
Marshall Test, Core Drilling, Extractor – Centrifuge/ Reflux, Penetration Test, Ductility of Bituminous, Softening Point, Flash & Fire Point, Saybolt Viscosity, Loss on Heating, Distilation Cutback Asphalt, Asphalt Penetration Test, Asphalt Compactor, Benkleman Beam, Mot Straight Edge, etc
Mining - Coal Testing Equipment
Jaw Crusher, Roll Crusher, Ball Mill, Hammer Mill, Grinding Mill, Drying Shed, Hardgrove Grindability Index, Lab. Pulverizer, Shaking Table / Table Consentrator / Meja Goyang, Dish Pulverizer, Sieve Shaker, Core Cutting Machine, Raymond Mill, Rotary Sample Devider, Thin Section, Laboratory Disc Mill, Drying Oven, Cutting Machine, Dust Collector, Mixer-V, Big Drying Oven, etc
UNTUK INFORMASI & PEMESANAN HUBUNGI LINE MARKETING KAMI
Marketing : Deddy Sugianto - HP 0818.569.876
E-mail : deddy_marketing1mbt@yahoo.co.id
Customer Service (24 hours) : 085.2221.77772
Supply kami juga meliputi Product Import seperti : ELE International, Matest, Control, Humboldt, Jinan, Hoffman, Proceq, Ohaus, Mitutoyo, Yamamoto, AND, Nagata, etc
Products List :
SOIL EQUIPMENT (Lab. Uji Mekanika Tanah / Mektan) :
HAND BOR (SO-110A)
STANDARD PENETRATION TEST, ASTM D-1586/ AASHTO T-206 (SO-130A)
SAMPLE EXTRUDER (SO-140)
SAMPLE EXTRUDER, Electric (SO-145)
DYNAMIC CONE PENETROMETER/ DCP (SO-150)
TUBE DENSITY SAMPLER, ASTM D-2573 (SO-160)
CORPS OF ENGINEER SOIL SURFACE SAMPLER, ASTM D-2937 (SO-170)
DUTCH CONE PENETROMETER/ Sondir 2.5 Ton, ASTM D-3441(SO-200)
DUTCH CONE PENETROMETER/ Sondir 5 Ton, ASTM D-3441 (SO-210)
HYDRAULIC CONE PENETROMETER/ Sondir Hydrolik 2.5 Ton, ASTM D-3441 (SO-200HD)
HYDRAULIC CONE PENETROMETER/ Sondir Hidrolik 5 Ton, ASTM D-3441 (SO-210HD)
HYDRAULIC CONE PENETROMETER/ Sondir Hydraulic10 Ton, ASTM D-3441 (SO-700HD)
PLATE BEARING TEST SET, ASTM D-1194/ AASHTO T-235 (SO-250)
FIELD CBR TEST SET, ASTM D-4429 (SO-260)
PROVING RING PENETROMETER (SO-270)
TVA PENETROMETER (SO-280)
ATTERBERGH LIMIT (SO-310, SO-315, SO-320)
LIQUID LIMIT TEST SET, ASTM D-4318/ AASHTO T-89 (SO-310)
LIQUID LIMIT DEVICE, Hand Operated, ASTM D-4318/ AASHTO T-89 (SO-311A)
LIQUID LIMIT DEVICE, Electric, ASTM D-4318/ AASHTO T-89 (SO-311B)
PLASTIC LIMIT TEST SET, ASTM D-4318/ AASHTO T-90 (SO-315)
SHRINKAGE LIMIT TEST SET, ASTM D-427/ AASHTO T-92 (SO-320)
HYDROMETER ANALYSIS TEST SET, ASTM D-422/ AASHTO T-88 (SO-330A)
MECHANICAL END OVER END SHAKER, BS-1377 (SO-338)
VACUUM STAND, With 6 Flask Capacity (SO-339A)
SPECIFIC GRAVITY Heating Method (SO-340)
SPECIFIC GRAVITY Vacuum Method, ASTM D-854/ AASHTO T-100 (SO-340A)
SPECIFIC GRAVITY Vacuum Method, ASTM D-854/ AASHTO T-100 (SO-340B)
COMPACTION TEST SET, ASTM D-698/ D-1557/ T-99/ T-180 (SO-350)
LABORATORY CBR TEST SET Electric ASTM D-1883/ AASHTO T-193 (SO-360A)
LABORATORY CBR TEST SET, ASTM D-1883/ AASHTO T-193 (SO-360B)
COMBINATION PERMEAMETER, ASTM D-2434/ AASHTO T-215 (SO-370)
COMPACTION PERMEAMETER TEST SET 1/ 30 cu.ft (SO-390A)
COMPACTION PERMEAMETER TEST SET, 1/ 13.33 cu.ft (SO-395A)
SAND CONE TEST SET (ASTM D-1556/ AASHTO T-191 (SO-400)
SPEEDY MOISTURE TESTER, AASHTO T-217 (SO-430)
MOISTURE CONTENT TEST SET (SO-450)
UNCONFINED COMPRESSION MACHINE, ASTM D-2166/ AASHTO T-208 (SO-500)
UNCONFINED COMPRESSION MACHINE Electric, ASTM D-2166/ AASHTO T-208 (SO-500A)
CONSOLIDATION TEST SET, ASTM D-2435/ AASHTO T-216 (SO-515)
DIRECT SHEAR TEST SET, ASTM D-3080/ AASHTO T-236 (SO-525)
TRIAXIAL TEST SET/ CU, UU, CD test methode, ASTM D-2850 (SO-600)
Digital reading for PP value
TRIAXIAL TEST SET/ CU, UU, CD test methode (SO-550), ASTM D-2850
Mercury manometer reading for PP value
AGGREGATE EQUIPMENT (Lab. Uji Bahan / Mektan) :
SAMPLE SPLITER 1/ 2inch, 12 holes, 1/ 2 inch chute width (AG-100)
SAMPLE SPLITER 3/ 4 inch, 12 holes, 3/ 4 inch chute width (AG-101)
SAMPLE SPLITER 1 inch (12 holes, 1 inch chute width (AG-102)
SAMPLE SPLITER 1-1/ 2 inch (12 holes, 1-1/ 2 inch chute width (AG-103)
SAMPLE SPLITER 2 inch (12 holes, 2 inch chute width (AG-104)
SAMPLE SPLITER 2 1/ 2 inch (12 holes, 2 1/ 2 inch chute width (AG-105)
SAMPLE SPLITER 3" inch 12 holes, 3 inch chute width (AG-106)
GILSON SAMPLE SPLITTER, Varieble chute width, 1/ 2" increment (AG-111)
PRECISSION SAMPLE SPLITTER, chute width 1/ 4" x 32 holes (AG-122)
PRECISSION SAMPLE SPLITTER, chute width 1/ 4" x 16 holes (AG-123)
LENGTH GAUGE BS-812 (AG-170)
THICKNESS GAUGE (BS- AG-180)
STANDAR SIEVE (Brass Round Sieve 8 inch Diameter)
Sieve Analisis - Gradation Test
SIEVE 4"; mesh 101.6 mm opening, 8 inch dia. (AG-200A)
SIEVE 3 1/ 2"; mesh 88.9 mm opening, 8 inch dia.(201A)
SIEVE 3"; mesh 76.2 mm opening, 8 inch dia.(202A)
SIEVE 2 1/ 2"; mesh 62.5 mm opening, 8 inch dia. (AG-203A)
SIEVE 2"; mesh 50.8 mm opening, 8 inch dia. (AG-204A )
SIEVE 1 3/ 4"; mesh 44.4 mm opening, 8 inch dia. (AG-205A)
SIEVE 1 1/ 2"; mesh 38.1 mm opening, 8 inch dia. (AG-206A)
SIEVE 1 1/ 4"; mesh 31.7 mm opening, 8 inch dia. (AG-207A)
SIEVE 1";mesh 25.4 mm opening, 8 inch dia. (AG-208A )
SIEVE 7/ 8"; mesh 22.2 mm opening, 8 inch dia. (AG-209A)
SIEVE 3/ 4"; mesh 19.0 mm opening, 8 inch dia. (AG-210A)
SIEVE 5/ 8"; mesh 15.8 mm opening, 8 inch dia. (AG-211A)
SIEVE 1/ 2"; mesh 12.7 mm opening, 8 inch dia (AG-212A)
SIEVE 7/ 16"; mesh 11.1 mm opening, 8 inch dia. (AG-213A)
SIEVE 3/ 8"; mesh 9.5 mm opening, 8 inch dia. (AG-214A)
SIEVE 5/ 16"; mesh 7.9 mm opening, 8 inch dia. (AG-215A)
SIEVE 1/ 4"; mesh 6.3 mm opening, 8 inch dia. (AG-216A)
SIEVE # 4; mesh 4.75 mm opening, 8 inch dia. (AG-218A)
SIEVE # 8; mesh 2.36 mm opening, 8 inch dia. (AG-222A)
SIEVE # 10; mesh 2.00 mm opening, 8 inch dia. (AG-223A)
SIEVE # 12; mesh 1.70 mm opening, 8 inch dia. (AG-224A)
SIEVE # 16; mesh 1.18 mm opening, 8 inch dia. (AG-226A)
SIEVE # 20; mesh 0.850 mm opening, 8 inch dia. (AG-228A)
SIEVE # 30; mesh 0.600 mm opening, 8 inch dia.( AG-230A)
SIEVE # 40; mesh 0.425 mm opening, 8 inch dia. (AG-232A)
SIEVE # 50; mesh 0.300 mm opening, 8 inch dia. (AG-234A)
SIEVE # 60; mesh 0.250 mm opening, 8 inch dia. AG-235A)
SIEVE # 70; mesh 0.212 mm opening, 8 inch dia. (AG-236A)
SIEVE # 80; mesh 0.180 mm opening, 8 inch dia. (AG-237A)
SIEVE # 100; mesh 0.150 mm opening, 8 inch dia. (AG-238A)
SIEVE # 120; mesh 0.125 mm opening, 8 inch dia. (AG-239A)
SIEVE # 140; mesh 0.106 mm opening, 8 inch dia. (AG-240A)
SIEVE # 170; mesh 0.090 mm opening, 8 inch dia. (AG-241A)
SIEVE # 200; mesh 0.075 mm opening, 8 inch dia. (AG-242A)
PAN & COVER; receiver with lid, 8 inch dia, (AG-250)
STANDAR SIEVE (Stainless Steel Round Sieve 8 inch Diameter)
Sieve Analysis - Gradation Test - AG 300A up to AG 350)
SIEVE SHAKER, Hand Operated (AG-510)
SIEVE SHAKER, Electric (AG-515)
WOODEN STANDAR SIEVE (Stainlles Steel Round Sieve 8 inch Diameter)
WOODEN SIEVE 1/ 4 Inch up to 4 Inch (mesh 6.3 mm up to mesh 101.6 mm opening)
WOODEN SIEVE # 4; Mesh 4.75 mm opening
WET WASHING SIEVE, # 200, 8" dia., 4" depth (AG-492)
WET WASHING SIEVE, # 200, 8" dia., 8" depth (AG-493)
SAND EQUIVALENT TEST SET, ASTM D-2419 (AG-600)
SAND EQUIVALENT SHAKER, ASTM D-2419/ AASHTO T-176 (AG-610)
BOTTLE ROLLER BS-812/ ASTM C-117 (AG-621)
LOS ANGELES ABRASION MACHINE, ASTM C-131/ AASHTO T-96 (AG-700)
AGGREGATE IMPACT TEST, BS-812 (AG-750)
AGGREGATE CRUSHING VALUE APPARATUS, BS-812 (AG-760)
AGGREGATE CRUSHING VALUE APPARATUS (AG-760A)
BULK DENSITY TEST SET, ASTM C-29/ AASHTO T-19 (AG-800)
ABSORPTION OF FINE AGGREGATE TEST SET, ASTM C-128/ AASHTO T-84 (AG-810A)
SPECIFIC GRAVITY & ABSORPTION OF COARSE AGGREGATE TEST SET, Mechanical Balance, ASTM C-127/ AASHTO T-85 (AG-825)
SPECIFIC GRAVITY & ABSORPTION OF COARSE AGGREGATE TEST SET, Digital Balance, ASTM C-127/ AASHTO T-85 (AG-825)
ORGANIC IMPURITIES TEST SET, ASTM C-40/ AASHTO T-21 (AG-910)
SOUNDNESS TEST SET, ASTM C-88/ AASHTO T-104 (AG-920)
CEMENT EQUIPMENT (Lab. Uji Bahan / Beton) :
AIR PERMEABILITY OF PORLAND CEMENT BY FINENESS DEVICE, ASTM C-204/ AASHTO T-153 (CE-100)
SPECIFIC GRAVITY OF HYDRAULIC CEMENT TEST, ASTM C-188/ AASHTO T-133 (CE-110)
TIME OF SETTING OF HYDRAULIC CEMENT BY VICAT NEEDLE, ASTM C-187/ C-191/ T-129/ T-131 (CE-120)
COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTAR, ASTM C-109/ AASHTO T-106 (CE-160)
COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTAR Electric, ASTM C-109/ AASHTO T-106 (CE-160A)
COMPRESSION MACHINE 100 kN, Compressive Strength Cement Mortar, ASTM C-109 (CE-170)
COMPRESSION MACHINE 250 kN, Compressive Strength Cement Mortar, ASTM C-109 (CE-175)
CONCRETE EQUIPMENT (Lab. Uji Beton/ Bahan / Bangunan) :
CONCRETE CYLINDER MOLD (Silinder Beton)10 cm dia x 20 cm height (CO-300)
CONCRETE CYLINDER MOLD (Silinder Beton), 15 cm dia x 30 cm height (CO-301)
CONCRETE CUBE MOLD (Kubus Beton), 10 x 10 x 10 cm (CO-311)
CONCRETE CUBE MOLD (Kubus Beton), 15 x 15 x 15 cm (CO-312)
CONCRETE BEAM MOLD, 15 x 15 x 60 cm (CO-317 A)
CONCRETE BEAM MOLD, 20 x 20 x 80 cm (CO-319 A)
COMPRESSION MACHINE (Press Beton) 1500 kN, Hydraulic Hand Pump, ASTM C-39 (CO-321.3)
COMPRESSION MACHINE 2000 kN, Hydraulic Hand Pump, ASTM C-39 (CO-321.4)
COMPRESSION MACHINE 3000 kN, Hydraulic Hand Pump ASTM C-39 (CO-321.5)
COMPRESSION MACHINE 1500 kN, Electric Hydraulic Pump ASTM C-39 (CO-325.3)
COMPRESSION MACHINE 2000 kN, Electric Hydraulic Pump, ASTM C-39 (CO-325.4)
COMPRESSION MACHINE 3000 kN, Electric Hydraulic Pump (ASTM C-39 CO-325.5)
HYDRAULIC CONCRETE BEAM TESTING MACHINE, ASTM C-78 (CO-330)
MECHANICAL CONCRETE BEAM TESTING MACHINE, ASTM C-78 (CO-351)
COMPACTING FACTOR APPARATUS, BS-1881 (CO-355)
SLUMP TEST SET, ASTM C-143/ AASHTO T-119 (CO-370)
VEBE TIME, BS-1881 (CO-380)
AIR CONTENT OF FRESH MIXED CONCRETE, ASTM C-231/ AASHTO T-152 (CO-400)
VIBRATING TABLE (CO-410)
VERTICAL CYLINDER CAPPING SET, ASTM C-617 (CO-470)
MODULUS OF ELASTICITY IN CONCRETE TEST SET (CO-500)
SPLIT TENSILE TEST, BS-1881 (CO-525)
CONCRETE TEST HAMMER (ASTM C-805) Proceq/ Original Schmidt®, Matest, Tecnotest, elcometer.
CALIBRATION ANVIL, ASTM C-805 (CO-555)
LABORATORY CONCRETE MIXER (CO-610)
ASPHALT EQUIPMENT (Lab. Uji Aspal/ Jalan Raya/ transportasi) :
SPECIFIC GRAVITY OF SEMI - SOLID BITUMINOUS MATERIALS, ASTM D-70/ AASHTO T-228 (BI-100)
DISTILATION OF CUTBACK ASPHALTS, ASTM D-402/ AASHTO T-78 (BI-110)
WATER CONTENT IN PETROLEUM PRODUCTS, ASTM D-95/ AASHTO T-55 (BI-120)
SAYBOLT VISCOSIMETER, ASTM D-402/ AAHSTO T-78 (BI-150A)
ASTM THERMOMETER 17 C, 19 to 27 deg.C (GE-644.1)
ASTM THERMOMETER 18 C, 34 to 42 deg.C GE-644.2
ASTM THERMOMETER 19 C, 49 to 57 deg.C (GE-644.3)
ASTM THERMOMETER 20 C, 57 to 65 deg.C (GE-644.4)
ASTM THERMOMETER 21 C, 79 to 87 deg.C (GE-644.5)
ASTM THERMOMETER 22 C, 95 to 103 deg.C (GE-644.6)
FLASH AND FIRE POINT BY CLEVELAND OPEN CUP, ASTM D-92/ AASHTO T-48 (BI-200)
FLASH AND FIRE POINT BY CLEVELAND OPEN CUP, ASTM D-92/ AASHTO T-48 (BI-200 A)
SOFTENING POINT TEST SET, ASTM D-36/ AASHTO T-53 (BI-210)
LOSS ON HEATING / THIN-FILM TEST, ASTM D-6/ D-1754, AAHSTO T-47/ T-179 (BI-220)
LABORATORY PENETRATION TEST SET, ASTM D-5 / AASHTO T-49 (BI-230)
LABORATORY PENETRATION TEST SET; ASTM D-5/ AASHTO T-49 (BI-230 A)
DUCTILITY OF BITUMINOUS MATERIALS TEST SET, ASTM D-113/ AASHTO T-51 (BI-250)
CENTRIFUGE EXTRACTOR TEST SET, ASTM D-2172/ AASHTO T-164 (BI-300)
CENTRIFUGE EXTRACTOR TEST SET, ASTM D-2172/ AASHTO T-164 (BI-300 A)
REFLUX EXTRACTOR TEST SET, ASTM D-2172/ AASHTO T-164 (BI-310)
MARSHALL TEST SET, ASTM D-1559/ AASHTO T-245 (BI-320)
CORE DRILLING TEST SET, (BI-400)
BENKLEMAN BEAM, (BI-450)
MOT STRAIGHT EDGE (BI-470)
MISCELLANEOUS :
UNIVERSAL TESTING MACHINE 1000 kN, 2000 kN
Compression, Tensile, Bending and Shearing test
TENSILE TESTING MACHINE, test of PVC materials (MI-100)
DIBBLE (TUGAL) MI-120
RAIN GAUGE (MI-130)
MORTAR MIXEI, 5 – 10 Kg Capacity
GENERAL EQUIPMENT (Alat Uji Penunjang)
PROVING RIN G, 100 kg capacity + Kalibrasi (GE-101.1)
Proving Ring, 250 lbs capacity + Kalibrasi (GE-101.2)
Proving Ring, 500 lbs capacity + Kalibrasi (GE-101.3)
Proving Ring, 1.000 lbs capacity + Kalibrasi (GE-101.4)
Proving Ring, 2.000 lbs capacity + Kalibrasi (GE-101.5)
Proving Ring, 6.000 lbs capacity + Kalibrasi (GE-101.6)
Proving Ring, 10.000 lbs capacity + Kalibrasi (GE-101.7)
Dial Gauge - Indicator (Mitutoyo, Teclock), 0.2 in. x 0.0001 in (GE-130)
Dial Gauge - Indicator (Mitutoyo, Teclock), 1.0 in. x 0.01 in (GE-131)
Dial Gauge - Indicator (Mitutoyo, Teclock), 10 mm x 0.01 mm (GE-135)
Dial Gauge - Indicator (Mitutoyo, Teclock), 20 mm x 0.01 mm (GE-136)
Dial Gauge - Indicator (Mitutoyo, Teclock), 30 mm x 0.01 mm (GE-137)
Dial Gauge - Indicator (Mitutoyo, Teclock), 50 mm x 0.01 mm (GE-138)
Magnetic Dial Holder (GE-140)
Ohaus CENT O-GRAM BALANCE, Timbangan 311 gr cap x 0.01 sensitivity (GE-150)
Timbangan Ohaus - TRIPLE BEAM BALANCE (Ohaus, ADAM),
Timbangan 2610 gr cap x 0.1 sensitivity (GE-152)
Ohaus DIAL O- GRAM BALANCE, Timbangan 2610 gr cap x 0.1 sensitivity (GE-153)
Ohaus HEAVY DUTY SOLUTION BALANCE, Timbangan 20 kg cap x 1 sensitivity (GE-157)
PLATFORM SCALE (Nagata, AND), 50 kg cap x 10 gr sensitivity (GE-159)
DIGITAL BALANCE (AND), 310 gr cap x 0.001 gr sensitivity (GE-160)
DIGITAL BALANCE, 6100 gr cap x 0.1 gr sensitivity (GE-161)
OVEN (Memmert), 14 litre, drying type (GE-171)
OVEN (Memmert), 32 litre, drying type (GE-172)
OVEN (Memmert), 39 litre, drying type (GE-173)
OVEN (Memmert), 53 litre, drying type (GE-174)
OVEN (Memmert), 108 litre, drying type (GE-175)
OVEN (Memmert), 256 litre, drying type (GE-176)
OVEN (Memmert), 416 litre, drying type (GE-177)
OVEN (Memmert), 749 litre, drying type (GE-178)
HOT PLATE, Single burner plate (GE-191)
HOT PLATE, Double burner plate (GE-192)
GLASS PLATE, 10 mm thick, 30 x 30 cm (GE-396)
WATER BATH, COOLING SYSTEM
BUTANE FIELD HEATER, BUNSEN BURNER, STATIF, TRIPOD STAND,
GLASS CLAMP, ASBESTOS, WIRE GAUZE
SQUARE PAN, 25 x 25 x 5 cm; 40 x 40 x 5 cm; 50 x 50 x 7.5 cm; 65 x 65 x 7.5 cm.
RECTANGULAR PAN, 30 x 20 x 10 cm; 45 x 30 x 15 cm; 60 x 40 x 25 cm.
THIN BOX, ROUND PAN; SAMPLE CAN
MIXING BOWL, 10cm - 20cm - 24cm diameter.
GRADUATED CYLINDER, Glass, 25 ml, 50 ml, 100 ml, 250 ml, 500 ml, 1000 ml capacity.
GRADUATED CYLINDER, Plastic, 25 ml, 50 ml, 100 ml, 250 ml, 500 ml, 1000 ml capacity.
VOLUMETRIC FLASK, 100 ml, 250 ml, 500 ml, 1000 ml capacity.
BEAKER GLASS, 100 ml, 250 ml, 600 ml, 800 ml, 1000 ml capacity.
ERLENMEYAR FLASK, 125 ml, 250 ml, 500 ml, 1000 ml, 2000 ml capacity.
VACUUM FLASK, 125 ml, 250 ml, 500 ml, 1000 ml, 2000 ml capacity.
DENSITY BOTTLE, Glass 50 ml - 100 ml capacity.
SEPARATORY FUNNEL, Glass, 250 ml - 500 ml capacity.
FILTER FUNNEL, Porcelain, 125 ml - 500 ml capacity.
DESSICATOR, Non vacuum, silica gel, 21 cm -24 cm - 30 cm diameter.
DESSICATOR, Vacuum type, silica gel, 21 cm -24 cm - 30 cm diameter.
FUNNEL, plastic or glass, wide or narrow mouth.
BURRETE, , 10 ml, 25 ml, 50 ml, 100 ml capacity.
EVAPORATING DISH, 9 cm dia - 100 ml capacity; 12 cm dia - 250 ml capacity; 15 cm dia – 350
ml capacity; 17 cm dia., 500 ml capacity.
MORTAR & PASTLE, 12 cm - 15 cm- 18 cm diameter.
WASH BOTTLE, 250 ml - 500 ml - 1000 ml capacity.
PIPETTE, 5 ml - 10 ml capacity
CRUCIBLE, 13 ml - 18 ml - 25 ml - 40 ml capacity.
THERMOMETER, range 0-50 deg.C; 0-100 deg.C; 0-150 deg.C; 0-200 deg.C; 0-300 deg.C.
0-360 deg.C.
POCKET DIAL THERMOMETER, range 0 - 100; 0 - 200; 0 - 300 deg.C.
DIAL THERMOMETER, range 0 - 100; 0 - 200; 0 - 300 deg.C.
ASTM THERMOMETER 12 C, 20 to 102 deg.C / Specific Gravity (GE-641)
ASTM THERMOMETER 63 C, 8 to 32 deg.C (GE-642)
ASTM THERMOMETER 13 C, 155 to 170 deg.C / Loss on Heating (GE-643)
ASTM THERMOMETER 15 C, 15 C, 2 to 80 deg.C / Softening Point (GE-646.1)
ASTM THERMOMETER 16 C, 30 to 200 deg.C / Softening Point (GE-646.2)
ASTM THERMOMETER 11 C, 6 to 400 deg.C / Open Flash (GE-648)
ASTM THERMOMETER 7 C, 2 to 300 deg.C / Distilation (GE-649.1)
ASTM THERMOMETER 8 C, 2 to 400 deg.C / Distilation (GE-649.2)
MANOMETER, 25 kg/ cm2 capacity, 6" diameter (GE-670)
MANOMETER, 60 kg/ cm2 capacity, 6" diameter (GE-671)
MANOMETER, 150 kg/ cm2 capacity, 6" diameter (GE-672)
MANOMETER, 250 kg/ cm2 capacity, 6" diameter (GE-673)
MANOMETER, 300 kg/ cm2 capacity, 6" diameter (GE-674)
MANOMETER, 500 kg/ cm2 capacity, 6" diameter (GE-675)
MANOMETER, 700 kg/ cm2 capacity, 6" diameter (GE-676)
MANOMETER, 1000 kg/ cm2 capacity, 6" diameter (GE-677)
VACUUM MANOMETER, 4" dia. 0-76 cm HG (GE-679)
VACUUM PUMP, Rotary type, 1/ 2 HP (GE-680)
HYDRAULIC CYLINDER, 30 - 50 - 100 - 150 - 200 - Ton capacity.
HYDRAULIC HAND PUMP, 10.000 psi, single acting (GE-690)
HYDRAULIC HAND PUMP, 10.000 psi, double acting (GE-691)
HYDRAULIC ELECTRIC PUMP, 10.000 psi, single acting (GE-694)
HYDRAULIC ELECTRIC PUMP, 10.000 psi, double acting (GE-695)
HYDRAULIC HOSE, 100 - 200 cm length, 10.000 psi (GE-697)
STOP WATCH, 60 sec sweep x 30 min (GE-700)
STOP WATCH, 30 sec sweep x 30 min (GE-701)
VERNIER CALIPER, 6 inch (150 mm) range measuring (GE-710)
VERNIER CALIPER, 8 inch (200 mm) range measuring (GE-711)
VERNIER CALIPER, 10 inch (250 mm) range measuring (GE-712)
VERNIER CALIPER, 12 inch (300 mm) range measuring (GE-713)
Levels, Open End Wrench, Ring Spanner, Allen Key, Pipe Wrench, Strap Wrench, Adjustable
Wrench, Rubber Gloves, Leather Gloves, Asbestos Gloves, Quatering Canvas.
Round Scoop, Flat Scoop, Scoop Pan, Aggregate Scoop. Round Scoop, Flat Scoop, Scoop Pan,
Aggregate Scoop.Spatula, Scraper, Wire Saw, Spoon, Trowel, Gardener's Type Trowel, Chissel,
Ruler, Rubber Mallet, Steel Wire Brush, Brass Wire Brush, Soft Brush, Tamping Rod, Straight Edge. MORTAR MIXER, Bench model; 5 litre capacity.
MINING - COAL EQUIPMENT (Mesin - mesin mineral, batu bara & Peralatan uji laboratoriumnya)
JAW CRUSHER 5" x 8" (ME-100)
JAW CRUSHER 2 3/ 8" x 8" (ME-130)
JAW CRUSHER 6.5" x 8" (ME-110)
LAB TYPE JAW CRUSHER (ME-140)
SINGLE ROLL CRUSHER 10" (ME-150)
DOUBLE ROOL CRUSHER 10" x 6" (ME-160)
DOUBLE ROOL CRUSHER 20" (ME-165)
ROTARY SAMPLE DEVIDER 15 KG (ME-170S1)
ROTARY SAMPLE DEVIDER 30 KG (ME-170S2)
ROTARY SAMPLE DEVIDER 50 KG (ME-170S3)
ROTARY SAMPLE DEVIDER 120 KG (ME-170S4)
RO-TAP SIEVE SHAKER 8" (ME-180)
RO-TAP SIEVE SHAKER 12" (ME-185)
SHAKING TABLE / Table Consentrator / Meja Goyang (ME-190)
SAMPLE SPLITTER, Variable chute (alumunium) width 1/ 2 inch (1/ 2â€, 1â€, 1 ½â€, 2â€, etc)
SAMPLE SPLITTER, Stainlles steel, chute width 1/ 4 inch, 32 holes, with scoop & pan
SAMPLE SPLITTER, Stainlles steel, chute width 1/ 2 inch, 12 holes, with scoop & pan
SAMPLE SPLITTER, Stainlles steel, chute width 3/ 4 inch, 12 holes, with scoop & pan
SAMPLE SPLITTER, Stainlles steel, chute width 1" inch, 12 holes, with scoop & pan
DISC PULVERIZER (ME-210)
BALL MILL (ME-230BM)
HAMMER MILL (ME-240)
GRINDING MILL (ME-245)
RAYMOND MILL (ME-250)
HARD GROVE GRINDABILITY (ME-280)
BIG DRYING SHED 180 x 120 x 550 cm (ME-290)
HOT PLATE (ME-330)
DRYING OVEN 120 X 110 X 220 cm (ME-350)
CUTTING MESIN (ME-400)
LAB. PULVERIZER Pneumatic (ME-200P)
LAB. PULVERIZER Manual (ME-200A)
GRINDING MILL (ME-245)
V-MIXER (ME-175)
GRINDING HEAD SET C 1000
GRINDING HEAD SET C 2000
BIG DRYING SHED
DUST COLLECTOR
HOT PLATE
OVEN ROTARY
Part & Accessories :
JAW FACE 5" X 8"
JAW FACE 5" X 8" (Manganese)
JAW FACE TYPE LAB
Kami berupaya membantu untuk menyelematkan Investasi anda di bidang “Konstruksi Bangunan/ Gedung / Jalan, Riset/ Penelitian/ Laboratorium & Pendidikan, Sipil Engineering†menjadi “Bernilai Tinggi†dengan memilih dan menggunakan produk dengan KUALITAS & JAMINAN MUTU PABRIKAN.
PT. MBT Utama sejak Tahun 1974 dikenal sebagai “Pioneer†dibidang Peralatan Uji Laboratorium khususnya Laboratorium Sipil “Berpengalaman dan Ahli dibidang Civil Laboratory Testing Equipmentâ€.
Suatu kebanggan buat kami atas diberikannya kepercayaan oleh PT. MBT Utama Sebagai "Agent Resmi / Utama Divisi Penjualan Produk MBTâ€.
“Kami akan membantu anda Untuk Memilih & Memiliki Produk Berkualitas - Brand MBT†karena kami sangat menyanyangi Investasi Anda dan Juga Potensi Kami.
Memproduksi & Menjual Alat Lab :
• Alat Laboratorium Teknik Sipil
• Alat Laboratorium Mekanika Tanah / Mektan
• Alat Lab Beton laboratorium / Struktur / Mortar
• Alat Laboratorium Aspal / Asphalt Testing
• Alat Laboratorium Jalan Raya / Highway Testing
• Alat Laboratorium Uji Bahan
• Alat Laboratorium Batu Bara/ Pertambangan/ Mineral/ Preparation
• Alat Laboratorium Quality Control
• Alat Survey
• Timbangan Laboratorium / Balance
• Design, service / maintenance, kalibrasi alat laboratorium
• Pelatihan Teknisi Laboratorium & Quality Control
UNTUK INFORMASI & PEMESANAN HUBUNGI LINE MARKETING KAMI
Marketing : Deddy Sugianto - HP 0818.569.876
E-mail : deddy_marketing1mbt@yahoo.co.id
Customer Service (24 hours) : 085.2221.77772
Dengan senang hati kami akan melayani dan memberikan Informasi yang anda butuhkan.
- Alat Laboratorium Uji Tanah (Soil Laboratory Testing Equipment)
SOIL EQUIPMENT (Laboratorium Mekanika Tanah / Mektan) :
HAND BOR (SO-110A)
STANDARD PENETRATION TEST, ASTM D-1586/ AASHTO T-206 (SO-130A)
SAMPLE EXTRUDER (SO-140)
SAMPLE EXTRUDER, Electric (SO-145)
DYNAMIC CONE PENETROMETER/ DCP (SO-150)
TUBE DENSITY SAMPLER, ASTM D-2573 (SO-160)
CORPS OF ENGINEER SOIL SURFACE SAMPLER, ASTM D-2937 (SO-170)
DUTCH CONE PENETROMETER/ Sondir 2.5 Ton, ASTM D-3441(SO-200)
DUTCH CONE PENETROMETER/ Sondir 5 Ton, ASTM D-3441 (SO-210)
HYDRAULIC CONE PENETROMETER/ Sondir Hydrolik 2.5 Ton, ASTM D-3441 (SO-200HD)
HYDRAULIC CONE PENETROMETER/ Sondir Hidrolik 5 Ton, ASTM D-3441 (SO-210HD)
HYDRAULIC CONE PENETROMETER/ Sondir Hydraulic10 Ton, ASTM D-3441 (SO-700HD)
PLATE BEARING TEST SET, ASTM D-1194/ AASHTO T-235 (SO-250)
FIELD CBR TEST SET, ASTM D-4429 (SO-260)
PROVING RING PENETROMETER (SO-270)
TVA PENETROMETER (SO-280)
ATTERBERGH LIMIT (SO-310, SO-315, SO-320)
LIQUID LIMIT TEST SET, ASTM D-4318/ AASHTO T-89 (SO-310)
LIQUID LIMIT DEVICE, Hand Operated, ASTM D-4318/ AASHTO T-89 (SO-311A)
LIQUID LIMIT DEVICE, Electric, ASTM D-4318/ AASHTO T-89 (SO-311B)
PLASTIC LIMIT TEST SET, ASTM D-4318/ AASHTO T-90 (SO-315)
SHRINKAGE LIMIT TEST SET, ASTM D-427/ AASHTO T-92 (SO-320)
HYDROMETER ANALYSIS TEST SET, ASTM D-422/ AASHTO T-88 (SO-330A)
MECHANICAL END OVER END SHAKER, BS-1377 (SO-338)
VACUUM STAND, With 6 Flask Capacity (SO-339A)
SPECIFIC GRAVITY Heating Method (SO-340)
SPECIFIC GRAVITY Vacuum Method, ASTM D-854/ AASHTO T-100 (SO-340A)
SPECIFIC GRAVITY Vacuum Method, ASTM D-854/ AASHTO T-100 (SO-340B)
COMPACTION TEST SET, ASTM D-698/ D-1557/ T-99/ T-180 (SO-350)
LABORATORY CBR TEST SET Electric ASTM D-1883/ AASHTO T-193 (SO-360A)
LABORATORY CBR TEST SET, ASTM D-1883/ AASHTO T-193 (SO-360B)
COMBINATION PERMEAMETER, ASTM D-2434/ AASHTO T-215 (SO-370)
COMPACTION PERMEAMETER TEST SET 1/ 30 cu.ft (SO-390A)
COMPACTION PERMEAMETER TEST SET, 1/ 13.33 cu.ft (SO-395A)
SAND CONE TEST SET (ASTM D-1556/ AASHTO T-191 (SO-400)
SPEEDY MOISTURE TESTER, AASHTO T-217 (SO-430)
MOISTURE CONTENT TEST SET (SO-450)
UNCONFINED COMPRESSION MACHINE, ASTM D-2166/ AASHTO T-208 (SO-500)
UNCONFINED COMPRESSION MACHINE Electric, ASTM D-2166/ AASHTO T-208 (SO-500A)
CONSOLIDATION TEST SET, ASTM D-2435/ AASHTO T-216 (SO-515)
DIRECT SHEAR TEST SET, ASTM D-3080/ AASHTO T-236 (SO-525)
TRIAXIAL TEST SET/ CU, UU, CD test methode, ASTM D-2850 (SO-600)
Digital reading for PP value
TRIAXIAL TEST SET/ CU, UU, CD test methode (SO-550), ASTM D-2850
Mercury manometer reading for PP value
AGGREGATE EQUIPMENT (Lab. Uji Bahan / Mektan) :
SAMPLE SPLITER 1/ 2inch, 12 holes, 1/ 2 inch chute width (AG-100)
SAMPLE SPLITER 3/ 4 inch, 12 holes, 3/ 4 inch chute width (AG-101)
SAMPLE SPLITER 1 inch (12 holes, 1 inch chute width (AG-102)
SAMPLE SPLITER 1-1/ 2 inch (12 holes, 1-1/ 2 inch chute width (AG-103)
SAMPLE SPLITER 2 inch (12 holes, 2 inch chute width (AG-104)
SAMPLE SPLITER 2 1/ 2 inch (12 holes, 2 1/ 2 inch chute width (AG-105)
SAMPLE SPLITER 3" inch 12 holes, 3 inch chute width (AG-106)
GILSON SAMPLE SPLITTER, Varieble chute width, 1/ 2" increment (AG-111)
PRECISSION SAMPLE SPLITTER, chute width 1/ 4" x 32 holes (AG-122)
PRECISSION SAMPLE SPLITTER, chute width 1/ 4" x 16 holes (AG-123)
LENGTH GAUGE BS-812 (AG-170)
THICKNESS GAUGE (BS- AG-180)
STANDAR SIEVE (Brass Round Sieve 8 inch Diameter)
Sieve Analisis - Gradation Test
SIEVE 4"; mesh 101.6 mm opening, 8 inch dia. (AG-200A)
SIEVE 3 1/ 2"; mesh 88.9 mm opening, 8 inch dia.(201A)
SIEVE 3"; mesh 76.2 mm opening, 8 inch dia.(202A)
SIEVE 2 1/ 2"; mesh 62.5 mm opening, 8 inch dia. (AG-203A)
SIEVE 2"; mesh 50.8 mm opening, 8 inch dia. (AG-204A )
SIEVE 1 3/ 4"; mesh 44.4 mm opening, 8 inch dia. (AG-205A)
SIEVE 1 1/ 2"; mesh 38.1 mm opening, 8 inch dia. (AG-206A)
SIEVE 1 1/ 4"; mesh 31.7 mm opening, 8 inch dia. (AG-207A)
SIEVE 1";mesh 25.4 mm opening, 8 inch dia. (AG-208A )
SIEVE 7/ 8"; mesh 22.2 mm opening, 8 inch dia. (AG-209A)
SIEVE 3/ 4"; mesh 19.0 mm opening, 8 inch dia. (AG-210A)
SIEVE 5/ 8"; mesh 15.8 mm opening, 8 inch dia. (AG-211A)
SIEVE 1/ 2"; mesh 12.7 mm opening, 8 inch dia (AG-212A)
SIEVE 7/ 16"; mesh 11.1 mm opening, 8 inch dia. (AG-213A)
SIEVE 3/ 8"; mesh 9.5 mm opening, 8 inch dia. (AG-214A)
SIEVE 5/ 16"; mesh 7.9 mm opening, 8 inch dia. (AG-215A)
SIEVE 1/ 4"; mesh 6.3 mm opening, 8 inch dia. (AG-216A)
SIEVE # 4; mesh 4.75 mm opening, 8 inch dia. (AG-218A)
SIEVE # 8; mesh 2.36 mm opening, 8 inch dia. (AG-222A)
SIEVE # 10; mesh 2.00 mm opening, 8 inch dia. (AG-223A)
SIEVE # 12; mesh 1.70 mm opening, 8 inch dia. (AG-224A)
SIEVE # 16; mesh 1.18 mm opening, 8 inch dia. (AG-226A)
SIEVE # 20; mesh 0.850 mm opening, 8 inch dia. (AG-228A)
SIEVE # 30; mesh 0.600 mm opening, 8 inch dia.( AG-230A)
SIEVE # 40; mesh 0.425 mm opening, 8 inch dia. (AG-232A)
SIEVE # 50; mesh 0.300 mm opening, 8 inch dia. (AG-234A)
SIEVE # 60; mesh 0.250 mm opening, 8 inch dia. AG-235A)
SIEVE # 70; mesh 0.212 mm opening, 8 inch dia. (AG-236A)
SIEVE # 80; mesh 0.180 mm opening, 8 inch dia. (AG-237A)
SIEVE # 100; mesh 0.150 mm opening, 8 inch dia. (AG-238A)
SIEVE # 120; mesh 0.125 mm opening, 8 inch dia. (AG-239A)
SIEVE # 140; mesh 0.106 mm opening, 8 inch dia. (AG-240A)
SIEVE # 170; mesh 0.090 mm opening, 8 inch dia. (AG-241A)
SIEVE # 200; mesh 0.075 mm opening, 8 inch dia. (AG-242A)
PAN & COVER; receiver with lid, 8 inch dia, (AG-250)
STANDAR SIEVE (Stainless Steel Round Sieve 8 inch Diameter)
Sieve Analysis - Gradation Test - AG 300A up to AG 350)
SIEVE SHAKER, Hand Operated (AG-510)
SIEVE SHAKER, Electric (AG-515)
Rotap Sieve Shaker
WOODEN STANDAR SIEVE (Stainlles Steel Round Sieve 8 inch Diameter)
WOODEN SIEVE 1/ 4 Inch up to 4 Inch (mesh 6.3 mm up to mesh 101.6 mm opening)
WOODEN SIEVE # 4; Mesh 4.75 mm opening
WET WASHING SIEVE, # 200, 8" dia., 4" depth (AG-492)
WET WASHING SIEVE, # 200, 8" dia., 8" depth (AG-493)
SAND EQUIVALENT TEST SET, ASTM D-2419 (AG-600)
SAND EQUIVALENT SHAKER, ASTM D-2419/ AASHTO T-176 (AG-610)
BOTTLE ROLLER BS-812/ ASTM C-117 (AG-621)
LOS ANGELES ABRASION MACHINE, ASTM C-131/ AASHTO T-96 (AG-700)
AGGREGATE IMPACT TEST, BS-812 (AG-750)
AGGREGATE CRUSHING VALUE APPARATUS, BS-812 (AG-760)
AGGREGATE CRUSHING VALUE APPARATUS (AG-760A)
BULK DENSITY TEST SET, ASTM C-29/ AASHTO T-19 (AG-800)
ABSORPTION OF FINE AGGREGATE TEST SET, ASTM C-128/ AASHTO T-84 (AG-810A)
SPECIFIC GRAVITY & ABSORPTION OF COARSE AGGREGATE TEST SET, Mechanical Balance, ASTM C-127/ AASHTO T-85 (AG-825)
SPECIFIC GRAVITY & ABSORPTION OF COARSE AGGREGATE TEST SET, Digital Balance, ASTM C-127/ AASHTO T-85 (AG-825)
ORGANIC IMPURITIES TEST SET, ASTM C-40/ AASHTO T-21 (AG-910)
SOUNDNESS TEST SET, ASTM C-88/ AASHTO T-104 (AG-920)
PT. MBT Utama sejak Tahun 1974 dikenal sebagai “Pioneer†dibidang Peralatan Uji Laboratorium khususnya Laboratorium Sipil “Berpengalaman dan Ahli dibidang Civil Laboratory Testing Equipmentâ€.
Suatu kebanggan buat kami atas diberikannya kepercayaan oleh PT. MBT Utama Sebagai "Agent Resmi / Utama Divisi Penjualan Produk MBTâ€.
“Kami akan membantu anda Untuk Memilih & Memiliki Produk Berkualitas - Brand MBT†karena kami sangat menyanyangi Investasi Anda dan Juga Potensi Kami.
UNTUK INFORMASI & PEMESANAN HUBUNGI LINE MARKETING KAMI
Marketing : Deddy Sugianto - HP 0818.569.876
E-mail : deddy_marketing1mbt@yahoo.co.id
Customer Service (24 hours) : 085.2221.77772
Dengan senang hati kami akan melayani dan memberikan Informasi yang anda butuhkan.
- Alat Laboratorium Uji Beton (Concrete Laboratory Testing Equipment)
CONCRETE EQUIPMENT (Laboratorium Uji Beton/ Bahan / Bangunan) :
CONCRETE CYLINDER MOLD (Silinder Beton)10 cm dia x 20 cm height (CO-300)
CONCRETE CYLINDER MOLD (Silinder Beton), 15 cm dia x 30 cm height (CO-301)
CONCRETE CUBE MOLD (Kubus Beton), 10 x 10 x 10 cm (CO-311)
CONCRETE CUBE MOLD (Kubus Beton), 15 x 15 x 15 cm (CO-312)
CONCRETE BEAM MOLD, 15 x 15 x 60 cm (CO-317 A)
CONCRETE BEAM MOLD, 20 x 20 x 80 cm (CO-319 A)
COMPRESSION MACHINE (Press Beton) 1500 kN, Hydraulic Hand Pump, ASTM C-39 (CO-321.3)
COMPRESSION MACHINE 2000 kN, Hydraulic Hand Pump, ASTM C-39 (CO-321.4)
COMPRESSION MACHINE 3000 kN, Hydraulic Hand Pump ASTM C-39 (CO-321.5)
COMPRESSION MACHINE 1500 kN, Electric Hydraulic Pump ASTM C-39 (CO-325.3)
COMPRESSION MACHINE 2000 kN, Electric Hydraulic Pump, ASTM C-39 (CO-325.4)
COMPRESSION MACHINE 3000 kN, Electric Hydraulic Pump (ASTM C-39 CO-325.5)
HYDRAULIC CONCRETE BEAM TESTING MACHINE, ASTM C-78 (CO-330)
MECHANICAL CONCRETE BEAM TESTING MACHINE, ASTM C-78 (CO-351)
COMPACTING FACTOR APPARATUS, BS-1881 (CO-355)
SLUMP TEST SET, ASTM C-143/ AASHTO T-119 (CO-370)
VEBE TIME, BS-1881 (CO-380)
AIR CONTENT OF FRESH MIXED CONCRETE, ASTM C-231/ AASHTO T-152 (CO-400)
VIBRATING TABLE (CO-410)
VERTICAL CYLINDER CAPPING SET, ASTM C-617 (CO-470)
MODULUS OF ELASTICITY IN CONCRETE TEST SET (CO-500)
SPLIT TENSILE TEST, BS-1881 (CO-525)
CONCRETE TEST HAMMER (ASTM C-805) Proceq/ Original Schmidt®, Matest, Tecnotest, elcometer.
DIGITAL CONCRETE TEST HAMMER
CALIBRATION ANVIL, ASTM C-805 (CO-555)
LABORATORY CONCRETE MIXER (CO-610)
CEMENT EQUIPMENT (Lab. Uji Bahan / Beton) :
AIR PERMEABILITY OF PORLAND CEMENT BY FINENESS DEVICE, ASTM C-204/ AASHTO T-153 (CE-100)
SPECIFIC GRAVITY OF HYDRAULIC CEMENT TEST, ASTM C-188/ AASHTO T-133 (CE-110)
TIME OF SETTING OF HYDRAULIC CEMENT BY VICAT NEEDLE, ASTM C-187/ C-191/ T-129/ T-131 (CE-120)
COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTAR, ASTM C-109/ AASHTO T-106 (CE-160)
COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTAR Electric, ASTM C-109/ AASHTO T-106 (CE-160A)
COMPRESSION MACHINE 100 kN, Compressive Strength Cement Mortar, ASTM C-109 (CE-170)
COMPRESSION MACHINE 250 kN, Compressive Strength Cement Mortar, ASTM C-109 (CE-175)
AGGREGATE EQUIPMENT (Lab. Uji Bahan / Mektan) :
SAMPLE SPLITER 1/ 2inch, 12 holes, 1/ 2 inch chute width (AG-100)
SAMPLE SPLITER 3/ 4 inch, 12 holes, 3/ 4 inch chute width (AG-101)
SAMPLE SPLITER 1 inch (12 holes, 1 inch chute width (AG-102)
SAMPLE SPLITER 1-1/ 2 inch (12 holes, 1-1/ 2 inch chute width (AG-103)
SAMPLE SPLITER 2 inch (12 holes, 2 inch chute width (AG-104)
SAMPLE SPLITER 2 1/ 2 inch (12 holes, 2 1/ 2 inch chute width (AG-105)
SAMPLE SPLITER 3" inch 12 holes, 3 inch chute width (AG-106)
GILSON SAMPLE SPLITTER, Varieble chute width, 1/ 2" increment (AG-111)
PRECISSION SAMPLE SPLITTER, chute width 1/ 4" x 32 holes (AG-122)
PRECISSION SAMPLE SPLITTER, chute width 1/ 4" x 16 holes (AG-123)
LENGTH GAUGE BS-812 (AG-170)
THICKNESS GAUGE (BS- AG-180)
STANDAR SIEVE (Brass Round Sieve 8 inch Diameter)
Sieve Analisis - Gradation Test
SIEVE 4"; mesh 101.6 mm opening, 8 inch dia. (AG-200A)
SIEVE 3 1/ 2"; mesh 88.9 mm opening, 8 inch dia.(201A)
SIEVE 3"; mesh 76.2 mm opening, 8 inch dia.(202A)
SIEVE 2 1/ 2"; mesh 62.5 mm opening, 8 inch dia. (AG-203A)
SIEVE 2"; mesh 50.8 mm opening, 8 inch dia. (AG-204A )
SIEVE 1 3/ 4"; mesh 44.4 mm opening, 8 inch dia. (AG-205A)
SIEVE 1 1/ 2"; mesh 38.1 mm opening, 8 inch dia. (AG-206A)
SIEVE 1 1/ 4"; mesh 31.7 mm opening, 8 inch dia. (AG-207A)
SIEVE 1";mesh 25.4 mm opening, 8 inch dia. (AG-208A )
SIEVE 7/ 8"; mesh 22.2 mm opening, 8 inch dia. (AG-209A)
SIEVE 3/ 4"; mesh 19.0 mm opening, 8 inch dia. (AG-210A)
SIEVE 5/ 8"; mesh 15.8 mm opening, 8 inch dia. (AG-211A)
SIEVE 1/ 2"; mesh 12.7 mm opening, 8 inch dia (AG-212A)
SIEVE 7/ 16"; mesh 11.1 mm opening, 8 inch dia. (AG-213A)
SIEVE 3/ 8"; mesh 9.5 mm opening, 8 inch dia. (AG-214A)
SIEVE 5/ 16"; mesh 7.9 mm opening, 8 inch dia. (AG-215A)
SIEVE 1/ 4"; mesh 6.3 mm opening, 8 inch dia. (AG-216A)
SIEVE # 4; mesh 4.75 mm opening, 8 inch dia. (AG-218A)
SIEVE # 8; mesh 2.36 mm opening, 8 inch dia. (AG-222A)
SIEVE # 10; mesh 2.00 mm opening, 8 inch dia. (AG-223A)
SIEVE # 12; mesh 1.70 mm opening, 8 inch dia. (AG-224A)
SIEVE # 16; mesh 1.18 mm opening, 8 inch dia. (AG-226A)
SIEVE # 20; mesh 0.850 mm opening, 8 inch dia. (AG-228A)
SIEVE # 30; mesh 0.600 mm opening, 8 inch dia.( AG-230A)
SIEVE # 40; mesh 0.425 mm opening, 8 inch dia. (AG-232A)
SIEVE # 50; mesh 0.300 mm opening, 8 inch dia. (AG-234A)
SIEVE # 60; mesh 0.250 mm opening, 8 inch dia. AG-235A)
SIEVE # 70; mesh 0.212 mm opening, 8 inch dia. (AG-236A)
SIEVE # 80; mesh 0.180 mm opening, 8 inch dia. (AG-237A)
SIEVE # 100; mesh 0.150 mm opening, 8 inch dia. (AG-238A)
SIEVE # 120; mesh 0.125 mm opening, 8 inch dia. (AG-239A)
SIEVE # 140; mesh 0.106 mm opening, 8 inch dia. (AG-240A)
SIEVE # 170; mesh 0.090 mm opening, 8 inch dia. (AG-241A)
SIEVE # 200; mesh 0.075 mm opening, 8 inch dia. (AG-242A)
PAN & COVER; receiver with lid, 8 inch dia, (AG-250)
STANDAR SIEVE (Stainless Steel Round Sieve 8 inch Diameter)
Sieve Analysis - Gradation Test - AG 300A up to AG 350)
SIEVE SHAKER, Hand Operated (AG-510)
SIEVE SHAKER, Electric (AG-515)
Rotap Sieve Shaker
WOODEN STANDAR SIEVE (Stainlles Steel Round Sieve 8 inch Diameter)
WOODEN SIEVE 1/ 4 Inch up to 4 Inch (mesh 6.3 mm up to mesh 101.6 mm opening)
WOODEN SIEVE # 4; Mesh 4.75 mm opening
WET WASHING SIEVE, # 200, 8" dia., 4" depth (AG-492)
WET WASHING SIEVE, # 200, 8" dia., 8" depth (AG-493)
SAND EQUIVALENT TEST SET, ASTM D-2419 (AG-600)
SAND EQUIVALENT SHAKER, ASTM D-2419/ AASHTO T-176 (AG-610)
BOTTLE ROLLER BS-812/ ASTM C-117 (AG-621)
LOS ANGELES ABRASION MACHINE, ASTM C-131/ AASHTO T-96 (AG-700)
AGGREGATE IMPACT TEST, BS-812 (AG-750)
AGGREGATE CRUSHING VALUE APPARATUS, BS-812 (AG-760)
AGGREGATE CRUSHING VALUE APPARATUS (AG-760A)
BULK DENSITY TEST SET, ASTM C-29/ AASHTO T-19 (AG-800)
ABSORPTION OF FINE AGGREGATE TEST SET, ASTM C-128/ AASHTO T-84 (AG-810A)
SPECIFIC GRAVITY & ABSORPTION OF COARSE AGGREGATE TEST SET, Mechanical Balance, ASTM C-127/ AASHTO T-85 (AG-825)
SPECIFIC GRAVITY & ABSORPTION OF COARSE AGGREGATE TEST SET, Digital Balance, ASTM C-127/ AASHTO T-85 (AG-825)
ORGANIC IMPURITIES TEST SET, ASTM C-40/ AASHTO T-21 (AG-910)
SOUNDNESS TEST SET, ASTM C-88/ AASHTO T-104 (AG-920)
PT. MBT Utama sejak Tahun 1974 dikenal sebagai “Pioneer†dibidang Peralatan Uji Laboratorium khususnya Laboratorium Sipil “Berpengalaman dan Ahli dibidang Civil Laboratory Testing Equipmentâ€.
Suatu kebanggan buat kami atas diberikannya kepercayaan oleh PT. MBT Utama Sebagai "Agent Resmi / Utama Divisi Penjualan Produk MBTâ€.
“Kami akan membantu anda Untuk Memilih & Memiliki Produk Berkualitas - Brand MBT†karena kami sangat menyanyangi Investasi Anda dan Juga Potensi Kami.
UNTUK INFORMASI & PEMESANAN HUBUNGI LINE MARKETING KAMI
Marketing : Deddy Sugianto - HP 0818.569.876
E-mail : deddy_marketing1mbt@yahoo.co.id
Customer Service (24 hours) : 085.2221.77772
Dengan senang hati kami akan melayani dan memberikan Informasi yang anda butuhkan.
- Alat Laboratorium Uji Aspal (Asphalt Laboratory Testing Equipment)
ASPHALT EQUIPMENT (Laboratorium Uji Aspal/ Jalan Raya/ Transportasi) :
SPECIFIC GRAVITY OF SEMI - SOLID BITUMINOUS MATERIALS, ASTM D-70/ AASHTO T-228 (BI-100)
DISTILATION OF CUTBACK ASPHALTS, ASTM D-402/ AASHTO T-78 (BI-110)
WATER CONTENT IN PETROLEUM PRODUCTS, ASTM D-95/ AASHTO T-55 (BI-120)
SAYBOLT VISCOSIMETER, ASTM D-402/ AAHSTO T-78 (BI-150A)
ASTM THERMOMETER 17 C, 19 to 27 deg.C (GE-644.1)
ASTM THERMOMETER 18 C, 34 to 42 deg.C GE-644.2
ASTM THERMOMETER 19 C, 49 to 57 deg.C (GE-644.3)
ASTM THERMOMETER 20 C, 57 to 65 deg.C (GE-644.4)
ASTM THERMOMETER 21 C, 79 to 87 deg.C (GE-644.5)
ASTM THERMOMETER 22 C, 95 to 103 deg.C (GE-644.6)
FLASH AND FIRE POINT BY CLEVELAND OPEN CUP, ASTM D-92/ AASHTO T-48 (BI-200)
FLASH AND FIRE POINT BY CLEVELAND OPEN CUP, ASTM D-92/ AASHTO T-48 (BI-200 A)
SOFTENING POINT TEST SET, ASTM D-36/ AASHTO T-53 (BI-210)
LOSS ON HEATING / THIN-FILM TEST, ASTM D-6/ D-1754, AAHSTO T-47/ T-179 (BI-220)
LABORATORY PENETRATION TEST SET, ASTM D-5 / AASHTO T-49 (BI-230)
LABORATORY PENETRATION TEST SET; ASTM D-5/ AASHTO T-49 (BI-230 A)
DUCTILITY OF BITUMINOUS MATERIALS TEST SET, ASTM D-113/ AASHTO T-51 (BI-250)
CENTRIFUGE EXTRACTOR TEST SET, ASTM D-2172/ AASHTO T-164 (BI-300)
CENTRIFUGE EXTRACTOR TEST SET, ASTM D-2172/ AASHTO T-164 (BI-300 A)
REFLUX EXTRACTOR TEST SET, ASTM D-2172/ AASHTO T-164 (BI-310)
MARSHALL TEST SET, ASTM D-1559/ AASHTO T-245 (BI-320)
CORE DRILLING TEST SET, (BI-400)
BENKLEMAN BEAM, (BI-450)
MOT STRAIGHT EDGE (BI-470)
AGGREGATE EQUIPMENT (Lab. Uji Bahan / Mektan) :
SAMPLE SPLITER 1/ 2inch, 12 holes, 1/ 2 inch chute width (AG-100)
SAMPLE SPLITER 3/ 4 inch, 12 holes, 3/ 4 inch chute width (AG-101)
SAMPLE SPLITER 1 inch (12 holes, 1 inch chute width (AG-102)
SAMPLE SPLITER 1-1/ 2 inch (12 holes, 1-1/ 2 inch chute width (AG-103)
SAMPLE SPLITER 2 inch (12 holes, 2 inch chute width (AG-104)
SAMPLE SPLITER 2 1/ 2 inch (12 holes, 2 1/ 2 inch chute width (AG-105)
SAMPLE SPLITER 3" inch 12 holes, 3 inch chute width (AG-106)
GILSON SAMPLE SPLITTER, Varieble chute width, 1/ 2" increment (AG-111)
PRECISSION SAMPLE SPLITTER, chute width 1/ 4" x 32 holes (AG-122)
PRECISSION SAMPLE SPLITTER, chute width 1/ 4" x 16 holes (AG-123)
LENGTH GAUGE BS-812 (AG-170)
THICKNESS GAUGE (BS- AG-180)
STANDAR SIEVE (Brass Round Sieve 8 inch Diameter)
Sieve Analisis - Gradation Test
SIEVE 4"; mesh 101.6 mm opening, 8 inch dia. (AG-200A)
SIEVE 3 1/ 2"; mesh 88.9 mm opening, 8 inch dia.(201A)
SIEVE 3"; mesh 76.2 mm opening, 8 inch dia.(202A)
SIEVE 2 1/ 2"; mesh 62.5 mm opening, 8 inch dia. (AG-203A)
SIEVE 2"; mesh 50.8 mm opening, 8 inch dia. (AG-204A )
SIEVE 1 3/ 4"; mesh 44.4 mm opening, 8 inch dia. (AG-205A)
SIEVE 1 1/ 2"; mesh 38.1 mm opening, 8 inch dia. (AG-206A)
SIEVE 1 1/ 4"; mesh 31.7 mm opening, 8 inch dia. (AG-207A)
SIEVE 1";mesh 25.4 mm opening, 8 inch dia. (AG-208A )
SIEVE 7/ 8"; mesh 22.2 mm opening, 8 inch dia. (AG-209A)
SIEVE 3/ 4"; mesh 19.0 mm opening, 8 inch dia. (AG-210A)
SIEVE 5/ 8"; mesh 15.8 mm opening, 8 inch dia. (AG-211A)
SIEVE 1/ 2"; mesh 12.7 mm opening, 8 inch dia (AG-212A)
SIEVE 7/ 16"; mesh 11.1 mm opening, 8 inch dia. (AG-213A)
SIEVE 3/ 8"; mesh 9.5 mm opening, 8 inch dia. (AG-214A)
SIEVE 5/ 16"; mesh 7.9 mm opening, 8 inch dia. (AG-215A)
SIEVE 1/ 4"; mesh 6.3 mm opening, 8 inch dia. (AG-216A)
SIEVE # 4; mesh 4.75 mm opening, 8 inch dia. (AG-218A)
SIEVE # 8; mesh 2.36 mm opening, 8 inch dia. (AG-222A)
SIEVE # 10; mesh 2.00 mm opening, 8 inch dia. (AG-223A)
SIEVE # 12; mesh 1.70 mm opening, 8 inch dia. (AG-224A)
SIEVE # 16; mesh 1.18 mm opening, 8 inch dia. (AG-226A)
SIEVE # 20; mesh 0.850 mm opening, 8 inch dia. (AG-228A)
SIEVE # 30; mesh 0.600 mm opening, 8 inch dia.( AG-230A)
SIEVE # 40; mesh 0.425 mm opening, 8 inch dia. (AG-232A)
SIEVE # 50; mesh 0.300 mm opening, 8 inch dia. (AG-234A)
SIEVE # 60; mesh 0.250 mm opening, 8 inch dia. AG-235A)
SIEVE # 70; mesh 0.212 mm opening, 8 inch dia. (AG-236A)
SIEVE # 80; mesh 0.180 mm opening, 8 inch dia. (AG-237A)
SIEVE # 100; mesh 0.150 mm opening, 8 inch dia. (AG-238A)
SIEVE # 120; mesh 0.125 mm opening, 8 inch dia. (AG-239A)
SIEVE # 140; mesh 0.106 mm opening, 8 inch dia. (AG-240A)
SIEVE # 170; mesh 0.090 mm opening, 8 inch dia. (AG-241A)
SIEVE # 200; mesh 0.075 mm opening, 8 inch dia. (AG-242A)
PAN & COVER; receiver with lid, 8 inch dia, (AG-250)
STANDAR SIEVE (Stainless Steel Round Sieve 8 inch Diameter)
Sieve Analysis - Gradation Test - AG 300A up to AG 350)
SIEVE SHAKER, Hand Operated (AG-510)
SIEVE SHAKER, Electric (AG-515)
Rotap Sieve Shaker
WOODEN STANDAR SIEVE (Stainlles Steel Round Sieve 8 inch Diameter)
WOODEN SIEVE 1/ 4 Inch up to 4 Inch (mesh 6.3 mm up to mesh 101.6 mm opening)
WOODEN SIEVE # 4; Mesh 4.75 mm opening
WET WASHING SIEVE, # 200, 8" dia., 4" depth (AG-492)
WET WASHING SIEVE, # 200, 8" dia., 8" depth (AG-493)
SAND EQUIVALENT TEST SET, ASTM D-2419 (AG-600)
SAND EQUIVALENT SHAKER, ASTM D-2419/ AASHTO T-176 (AG-610)
BOTTLE ROLLER BS-812/ ASTM C-117 (AG-621)
LOS ANGELES ABRASION MACHINE, ASTM C-131/ AASHTO T-96 (AG-700)
AGGREGATE IMPACT TEST, BS-812 (AG-750)
AGGREGATE CRUSHING VALUE APPARATUS, BS-812 (AG-760)
AGGREGATE CRUSHING VALUE APPARATUS (AG-760A)
BULK DENSITY TEST SET, ASTM C-29/ AASHTO T-19 (AG-800)
ABSORPTION OF FINE AGGREGATE TEST SET, ASTM C-128/ AASHTO T-84 (AG-810A)
SPECIFIC GRAVITY & ABSORPTION OF COARSE AGGREGATE TEST SET, Mechanical Balance, ASTM C-127/ AASHTO T-85 (AG-825)
SPECIFIC GRAVITY & ABSORPTION OF COARSE AGGREGATE TEST SET, Digital Balance, ASTM C-127/ AASHTO T-85 (AG-825)
ORGANIC IMPURITIES TEST SET, ASTM C-40/ AASHTO T-21 (AG-910)
SOUNDNESS TEST SET, ASTM C-88/ AASHTO T-104 (AG-920)
PT. MBT Utama sejak Tahun 1974 dikenal sebagai “Pioneer†dibidang Peralatan Uji Laboratorium khususnya Laboratorium Sipil “Berpengalaman dan Ahli dibidang Civil Laboratory Testing Equipmentâ€.
Suatu kebanggan buat kami atas diberikannya kepercayaan oleh PT. MBT Utama Sebagai "Agent Resmi / Utama Divisi Penjualan Produk MBTâ€.
“Kami akan membantu anda Untuk Memilih & Memiliki Produk Berkualitas - Brand MBT†karena kami sangat menyanyangi Investasi Anda dan Juga Potensi Kami.
UNTUK INFORMASI & PEMESANAN HUBUNGI LINE MARKETING KAMI
Marketing : Deddy Sugianto - HP 0818.569.876
E-mail : deddy_marketing1mbt@yahoo.co.id
Customer Service (24 hours) : 085.2221.77772
Dengan senang hati kami akan melayani dan memberikan Informasi yang anda butuhkan.
- Alat Penunjang Laboratorium Uji Aspal, Uji Beton, Uji Tanah
GENERAL EQUIPMENT (Alat Uji Penunjang Lab. Beton/ Struktur/ Uji bahan bangunan, Lab. Aspal/ Transportasi & Jalan Raya, Lab. Tanah, Lab. Pertambangan/ Geologi) :
PROVING RIN G, 100 kg capacity + Kalibrasi (GE-101.1)
Proving Ring, 250 lbs capacity + Kalibrasi (GE-101.2)
Proving Ring, 500 lbs capacity + Kalibrasi (GE-101.3)
Proving Ring, 1.000 lbs capacity + Kalibrasi (GE-101.4)
Proving Ring, 2.000 lbs capacity + Kalibrasi (GE-101.5)
Proving Ring, 6.000 lbs capacity + Kalibrasi (GE-101.6)
Proving Ring, 10.000 lbs capacity + Kalibrasi (GE-101.7)
Dial Gauge - Indicator (Mitutoyo, Teclock), 0.2 in. x 0.0001 in (GE-130)
Dial Gauge - Indicator (Mitutoyo, Teclock), 1.0 in. x 0.01 in (GE-131)
Dial Gauge - Indicator (Mitutoyo, Teclock), 10 mm x 0.01 mm (GE-135)
Dial Gauge - Indicator (Mitutoyo, Teclock), 20 mm x 0.01 mm (GE-136)
Dial Gauge - Indicator (Mitutoyo, Teclock), 30 mm x 0.01 mm (GE-137)
Dial Gauge - Indicator (Mitutoyo, Teclock), 50 mm x 0.01 mm (GE-138)
Magnetic Dial Holder (GE-140)
Ohaus CENT O-GRAM BALANCE, Timbangan 311 gr cap x 0.01 sensitivity (GE-150)
Timbangan Ohaus - TRIPLE BEAM BALANCE (Ohaus, ADAM),
Timbangan 2610 gr cap x 0.1 sensitivity (GE-152)
Ohaus DIAL O- GRAM BALANCE, Timbangan 2610 gr cap x 0.1 sensitivity (GE-153)
Ohaus HEAVY DUTY SOLUTION BALANCE, Timbangan 20 kg cap x 1 sensitivity (GE-157)
PLATFORM SCALE (Nagata, AND), 50 kg cap x 10 gr sensitivity (GE-159)
DIGITAL BALANCE (AND), 310 gr cap x 0.001 gr sensitivity (GE-160)
DIGITAL BALANCE, 6100 gr cap x 0.1 gr sensitivity (GE-161)
OVEN (Memmert), 14 litre, drying type (GE-171)
OVEN (Memmert), 32 litre, drying type (GE-172)
OVEN (Memmert), 39 litre, drying type (GE-173)
OVEN (Memmert), 53 litre, drying type (GE-174)
OVEN (Memmert), 108 litre, drying type (GE-175)
OVEN (Memmert), 256 litre, drying type (GE-176)
OVEN (Memmert), 416 litre, drying type (GE-177)
OVEN (Memmert), 749 litre, drying type (GE-178)
HOT PLATE, Single burner plate (GE-191)
HOT PLATE, Double burner plate (GE-192)
GLASS PLATE, 10 mm thick, 30 x 30 cm (GE-396)
WATER BATH, COOLING SYSTEM
BUTANE FIELD HEATER, BUNSEN BURNER, STATIF, TRIPOD STAND,
GLASS CLAMP, ASBESTOS, WIRE GAUZE
SQUARE PAN, 25 x 25 x 5 cm; 40 x 40 x 5 cm; 50 x 50 x 7.5 cm; 65 x 65 x 7.5 cm.
RECTANGULAR PAN, 30 x 20 x 10 cm; 45 x 30 x 15 cm; 60 x 40 x 25 cm.
THIN BOX, ROUND PAN; SAMPLE CAN
MIXING BOWL, 10cm - 20cm - 24cm diameter.
GRADUATED CYLINDER, Glass, 25 ml, 50 ml, 100 ml, 250 ml, 500 ml, 1000 ml capacity.
GRADUATED CYLINDER, Plastic, 25 ml, 50 ml, 100 ml, 250 ml, 500 ml, 1000 ml capacity.
VOLUMETRIC FLASK, 100 ml, 250 ml, 500 ml, 1000 ml capacity.
BEAKER GLASS, 100 ml, 250 ml, 600 ml, 800 ml, 1000 ml capacity.
ERLENMEYAR FLASK, 125 ml, 250 ml, 500 ml, 1000 ml, 2000 ml capacity.
VACUUM FLASK, 125 ml, 250 ml, 500 ml, 1000 ml, 2000 ml capacity.
DENSITY BOTTLE, Glass 50 ml - 100 ml capacity.
SEPARATORY FUNNEL, Glass, 250 ml - 500 ml capacity.
FILTER FUNNEL, Porcelain, 125 ml - 500 ml capacity.
DESSICATOR, Non vacuum, silica gel, 21 cm -24 cm - 30 cm diameter.
DESSICATOR, Vacuum type, silica gel, 21 cm -24 cm - 30 cm diameter.
FUNNEL, plastic or glass, wide or narrow mouth.
BURRETE, , 10 ml, 25 ml, 50 ml, 100 ml capacity.
EVAPORATING DISH, 9 cm dia - 100 ml capacity; 12 cm dia - 250 ml capacity; 15 cm dia – 350
ml capacity; 17 cm dia., 500 ml capacity.
MORTAR & PASTLE, 12 cm - 15 cm- 18 cm diameter.
WASH BOTTLE, 250 ml - 500 ml - 1000 ml capacity.
PIPETTE, 5 ml - 10 ml capacity
CRUCIBLE, 13 ml - 18 ml - 25 ml - 40 ml capacity.
THERMOMETER, range 0-50 deg.C; 0-100 deg.C; 0-150 deg.C; 0-200 deg.C; 0-300 deg.C.
0-360 deg.C.
POCKET DIAL THERMOMETER, range 0 - 100; 0 - 200; 0 - 300 deg.C.
DIAL THERMOMETER, range 0 - 100; 0 - 200; 0 - 300 deg.C.
ASTM THERMOMETER 12 C, 20 to 102 deg.C / Specific Gravity (GE-641)
ASTM THERMOMETER 63 C, 8 to 32 deg.C (GE-642)
ASTM THERMOMETER 13 C, 155 to 170 deg.C / Loss on Heating (GE-643)
ASTM THERMOMETER 15 C, 15 C, 2 to 80 deg.C / Softening Point (GE-646.1)
ASTM THERMOMETER 16 C, 30 to 200 deg.C / Softening Point (GE-646.2)
ASTM THERMOMETER 11 C, 6 to 400 deg.C / Open Flash (GE-648)
ASTM THERMOMETER 7 C, 2 to 300 deg.C / Distilation (GE-649.1)
ASTM THERMOMETER 8 C, 2 to 400 deg.C / Distilation (GE-649.2)
MANOMETER, 25 kg/ cm2 capacity, 6" diameter (GE-670)
MANOMETER, 60 kg/ cm2 capacity, 6" diameter (GE-671)
MANOMETER, 150 kg/ cm2 capacity, 6" diameter (GE-672)
MANOMETER, 250 kg/ cm2 capacity, 6" diameter (GE-673)
MANOMETER, 300 kg/ cm2 capacity, 6" diameter (GE-674)
MANOMETER, 500 kg/ cm2 capacity, 6" diameter (GE-675)
MANOMETER, 700 kg/ cm2 capacity, 6" diameter (GE-676)
MANOMETER, 1000 kg/ cm2 capacity, 6" diameter (GE-677)
VACUUM MANOMETER, 4" dia. 0-76 cm HG (GE-679)
VACUUM PUMP, Rotary type, 1/ 2 HP (GE-680)
HYDRAULIC CYLINDER, 30 - 50 - 100 - 150 - 200 - Ton capacity.
HYDRAULIC HAND PUMP, 10.000 psi, single acting (GE-690)
HYDRAULIC HAND PUMP, 10.000 psi, double acting (GE-691)
HYDRAULIC ELECTRIC PUMP, 10.000 psi, single acting (GE-694)
HYDRAULIC ELECTRIC PUMP, 10.000 psi, double acting (GE-695)
HYDRAULIC HOSE, 100 - 200 cm length, 10.000 psi (GE-697)
STOP WATCH, 60 sec sweep x 30 min (GE-700)
STOP WATCH, 30 sec sweep x 30 min (GE-701)
VERNIER CALIPER, 6 inch (150 mm) range measuring (GE-710)
VERNIER CALIPER, 8 inch (200 mm) range measuring (GE-711)
VERNIER CALIPER, 10 inch (250 mm) range measuring (GE-712)
VERNIER CALIPER, 12 inch (300 mm) range measuring (GE-713)
Levels, Open End Wrench, Ring Spanner, Allen Key, Pipe Wrench, Strap Wrench, Adjustable
Wrench, Rubber Gloves, Leather Gloves, Asbestos Gloves, Quatering Canvas.
Round Scoop, Flat Scoop, Scoop Pan, Aggregate Scoop. Round Scoop, Flat Scoop, Scoop Pan,
Aggregate Scoop.Spatula, Scraper, Wire Saw, Spoon, Trowel, Gardener's Type Trowel, Chissel,
Ruler, Rubber Mallet, Steel Wire Brush, Brass Wire Brush, Soft Brush, Tamping Rod, Straight Edge. MORTAR MIXER, Bench model; 5 litre capacity.
PT. MBT Utama sejak Tahun 1974 dikenal sebagai “Pioneer†dibidang Peralatan Uji Laboratorium khususnya Laboratorium Sipil “Berpengalaman dan Ahli dibidang Civil Laboratory Testing Equipmentâ€.
Suatu kebanggan buat kami atas diberikannya kepercayaan oleh PT. MBT Utama Sebagai "Agent Resmi / Utama Divisi Penjualan Produk MBTâ€.
“Kami akan membantu anda Untuk Memilih & Memiliki Produk Berkualitas - Brand MBT†karena kami sangat menyanyangi Investasi Anda dan Juga Potensi Kami.
UNTUK INFORMASI & PEMESANAN HUBUNGI LINE MARKETING KAMI
Marketing : Deddy Sugianto - HP 0818.569.876
E-mail : deddy_marketing1mbt@yahoo.co.id
Customer Service (24 hours) : 085.2221.77772
Dengan senang hati kami akan melayani dan memberikan Informasi yang anda butuhkan.
- Alat Laboratorium Pertambangan / Batubara & Mesin Mineral
MINING - COAL EQUIPMENT (Mesin - mesin mineral, Lab. Pertambangan / Batu bara / Lab. Geologi & Peralatan uji laboratoriumnya) :
JAW CRUSHER 5" x 8" (ME-100)
JAW CRUSHER 2 3/ 8" x 8" (ME-130)
JAW CRUSHER 6.5" x 8" (ME-110)
LAB TYPE JAW CRUSHER (ME-140)
SINGLE ROLL CRUSHER 10" (ME-150)
DOUBLE ROOL CRUSHER 10" x 6" (ME-160)
DOUBLE ROOL CRUSHER 20" (ME-165)
ROTARY SAMPLE DEVIDER 15 KG (ME-170S1)
ROTARY SAMPLE DEVIDER 30 KG (ME-170S2)
ROTARY SAMPLE DEVIDER 50 KG (ME-170S3)
ROTARY SAMPLE DEVIDER 120 KG (ME-170S4)
RO-TAP SIEVE SHAKER 8" (ME-180)
RO-TAP SIEVE SHAKER 12" (ME-185)
SHAKING TABLE / Table Consentrator / Meja Goyang (ME-190)
SAMPLE SPLITTER, Variable chute (alumunium) width 1/ 2 inch (1/ 2â€, 1â€, 1 ½â€, 2â€, etc)
SAMPLE SPLITTER, Stainlles steel, chute width 1/ 4 inch, 32 holes, with scoop & pan
SAMPLE SPLITTER, Stainlles steel, chute width 1/ 2 inch, 12 holes, with scoop & pan
SAMPLE SPLITTER, Stainlles steel, chute width 3/ 4 inch, 12 holes, with scoop & pan
SAMPLE SPLITTER, Stainlles steel, chute width 1" inch, 12 holes, with scoop & pan
DISC PULVERIZER (ME-210)
BALL MILL (ME-230BM)
HAMMER MILL (ME-240)
GRINDING MILL (ME-245)
RAYMOND MILL (ME-250)
HARD GROVE GRINDABILITY (ME-280)
BIG DRYING SHED 180 x 120 x 550 cm (ME-290)
HOT PLATE (ME-330)
DRYING OVEN 120 X 110 X 220 cm (ME-350)
CUTTING MESIN (ME-400)
LAB. PULVERIZER Pneumatic (ME-200P)
LAB. PULVERIZER Manual (ME-200A)
GRINDING MILL (ME-245)
V-MIXER (ME-175)
GRINDING HEAD SET C 1000
GRINDING HEAD SET C 2000
BIG DRYING SHED
DUST COLLECTOR
HOT PLATE
OVEN ROTARY
Part & Accessories :
JAW FACE 5" X 8"
JAW FACE 5" X 8" (Manganese)
JAW FACE TYPE LAB
SAMPLE SPLITER 1/ 2inch, 12 holes, 1/ 2 inch chute width (AG-100)
SAMPLE SPLITER 3/ 4 inch, 12 holes, 3/ 4 inch chute width (AG-101)
SAMPLE SPLITER 1 inch (12 holes, 1 inch chute width (AG-102)
SAMPLE SPLITER 1-1/ 2 inch (12 holes, 1-1/ 2 inch chute width (AG-103)
SAMPLE SPLITER 2 inch (12 holes, 2 inch chute width (AG-104)
SAMPLE SPLITER 2 1/ 2 inch (12 holes, 2 1/ 2 inch chute width (AG-105)
SAMPLE SPLITER 3" inch 12 holes, 3 inch chute width (AG-106)
GILSON SAMPLE SPLITTER, Varieble chute width, 1/ 2" increment (AG-111)
PRECISSION SAMPLE SPLITTER, chute width 1/ 4" x 32 holes (AG-122)
PRECISSION SAMPLE SPLITTER, chute width 1/ 4" x 16 holes (AG-123)
LENGTH GAUGE BS-812 (AG-170)
THICKNESS GAUGE (BS- AG-180)
STANDAR SIEVE (Brass Round Sieve 8 inch Diameter)
Sieve Analisis - Gradation Test
SIEVE 4"; mesh 101.6 mm opening, 8 inch dia. (AG-200A)
SIEVE 3 1/ 2"; mesh 88.9 mm opening, 8 inch dia.(201A)
SIEVE 3"; mesh 76.2 mm opening, 8 inch dia.(202A)
SIEVE 2 1/ 2"; mesh 62.5 mm opening, 8 inch dia. (AG-203A)
SIEVE 2"; mesh 50.8 mm opening, 8 inch dia. (AG-204A )
SIEVE 1 3/ 4"; mesh 44.4 mm opening, 8 inch dia. (AG-205A)
SIEVE 1 1/ 2"; mesh 38.1 mm opening, 8 inch dia. (AG-206A)
SIEVE 1 1/ 4"; mesh 31.7 mm opening, 8 inch dia. (AG-207A)
SIEVE 1";mesh 25.4 mm opening, 8 inch dia. (AG-208A )
SIEVE 7/ 8"; mesh 22.2 mm opening, 8 inch dia. (AG-209A)
SIEVE 3/ 4"; mesh 19.0 mm opening, 8 inch dia. (AG-210A)
SIEVE 5/ 8"; mesh 15.8 mm opening, 8 inch dia. (AG-211A)
SIEVE 1/ 2"; mesh 12.7 mm opening, 8 inch dia (AG-212A)
SIEVE 7/ 16"; mesh 11.1 mm opening, 8 inch dia. (AG-213A)
SIEVE 3/ 8"; mesh 9.5 mm opening, 8 inch dia. (AG-214A)
SIEVE 5/ 16"; mesh 7.9 mm opening, 8 inch dia. (AG-215A)
SIEVE 1/ 4"; mesh 6.3 mm opening, 8 inch dia. (AG-216A)
SIEVE # 4; mesh 4.75 mm opening, 8 inch dia. (AG-218A)
SIEVE # 8; mesh 2.36 mm opening, 8 inch dia. (AG-222A)
SIEVE # 10; mesh 2.00 mm opening, 8 inch dia. (AG-223A)
SIEVE # 12; mesh 1.70 mm opening, 8 inch dia. (AG-224A)
SIEVE # 16; mesh 1.18 mm opening, 8 inch dia. (AG-226A)
SIEVE # 20; mesh 0.850 mm opening, 8 inch dia. (AG-228A)
SIEVE # 30; mesh 0.600 mm opening, 8 inch dia.( AG-230A)
SIEVE # 40; mesh 0.425 mm opening, 8 inch dia. (AG-232A)
SIEVE # 50; mesh 0.300 mm opening, 8 inch dia. (AG-234A)
SIEVE # 60; mesh 0.250 mm opening, 8 inch dia. AG-235A)
SIEVE # 70; mesh 0.212 mm opening, 8 inch dia. (AG-236A)
SIEVE # 80; mesh 0.180 mm opening, 8 inch dia. (AG-237A)
SIEVE # 100; mesh 0.150 mm opening, 8 inch dia. (AG-238A)
SIEVE # 120; mesh 0.125 mm opening, 8 inch dia. (AG-239A)
SIEVE # 140; mesh 0.106 mm opening, 8 inch dia. (AG-240A)
SIEVE # 170; mesh 0.090 mm opening, 8 inch dia. (AG-241A)
SIEVE # 200; mesh 0.075 mm opening, 8 inch dia. (AG-242A)
PAN & COVER; receiver with lid, 8 inch dia, (AG-250)
STANDAR SIEVE (Stainless Steel Round Sieve 8 inch Diameter)
Sieve Analysis - Gradation Test - AG 300A up to AG 350)
SIEVE SHAKER, Hand Operated (AG-510)
SIEVE SHAKER, Electric (AG-515)
WOODEN STANDAR SIEVE (Stainlles Steel Round Sieve 8 inch Diameter)
WOODEN SIEVE 1/ 4 Inch up to 4 Inch (mesh 6.3 mm up to mesh 101.6 mm opening)
WOODEN SIEVE # 4; Mesh 4.75 mm opening
PT. MBT Utama sejak Tahun 1974 dikenal sebagai “Pioneer†dibidang Peralatan Uji Laboratorium khususnya Laboratorium Sipil “Berpengalaman dan Ahli dibidang Civil Laboratory Testing Equipmentâ€.
Suatu kebanggan buat kami atas diberikannya kepercayaan oleh PT. MBT Utama Sebagai "Agent Resmi / Utama Divisi Penjualan Produk MBTâ€.
“Kami akan membantu anda Untuk Memilih & Memiliki Produk Berkualitas - Brand MBT†karena kami sangat menyanyangi Investasi Anda dan Juga Potensi Kami.
UNTUK INFORMASI & PEMESANAN HUBUNGI LINE MARKETING KAMI
Marketing : Deddy Sugianto - HP 0818.569.876
E-mail : deddy_marketing1mbt@yahoo.co.id
Customer Service (24 hours) : 085.2221.77772
Dengan senang hati kami akan melayani dan memberikan Informasi yang anda butuhkan.
- DISTRIBUTOR & AGEN ALAT TEKNIK SIPIL
ALAT TEKNIK SIPIL (Distributor & Agen utama brand MBT)
PT. MBT Mektan Babakan Tujuh (since 1974) merupakan holding company melalui PT. Mega Bakti Teknik bersama sama memproduksi dan memasarkan alat laboratorium teknik sipil.
- Untuk Informasi dan Pemesanan : 0818.569.876.
- Customer Service : 085.2221.77772 ( 24 hours)
- Cataloque, informasi kerjasama dan dukungan pengadaan : deddy_marketing1mbt@ yahoo.co.id
Produk perusahaan kami meliputi :
SOIL EQUIPMENT (Lab. Uji Mekanika Tanah/ Mektan) :
• HAND BOR ( SO-110A)
• STANDARD PENETRATION TEST (SPT) , Astm D-1586/ Aashto T-206 (SO-130A)
• SAMPLE EXTRUDER (SO-140)
• SAMPLE EXTRUDER, Electric (SO-145)
• DYNAMIC CONE PENETROMETER/ DCP (SO-150)
• TUBE DENSITY SAMPLER, Astm D-2573 (SO-160)
• CORPS OF ENGINEER SOIL SURFACE SAMPLER, Astm D-2937 (SO-170)
• DUTCH CONE PENETROMETER/ Sondir 2.5 Ton, Astm D-3441(SO-200)
• DUTCH CONE PENETROMETER/ Sondir 5 Ton, Astm D-3441 (SO-210)
• HYDRAULIC CONE PENETROMETER/ Sondir Hydrolik 2.5 Ton, Astm D-3441 (SO-200HD)
• HYDRAULIC CONE PENETROMETER/ Sondir Hidrolik 5 Ton, Astm D-3441 (SO-210HD)
• HYDRAULIC CONE PENETROMETER/ Sondir Hidrolik 10 Ton, Astm D-3441 (SO-700HD)
• PLATE BEARING TEST SET, Astm D-1194/ Aashto T-235 (SO-250)
• FIELD CBR TEST SET, Astm D-4429 (SO-260)
• PROVING RING PENETROMETER (SO-270)
• TVA PENETROMETER (SO-280)
• ATTERBERGH LIMIT (SO-310, SO-315, SO-320)
• LIQUID LIMIT TEST SET, Astm D-4318/ Aashto T-89 (SO-310)
• LIQUID LIMIT DEVICE, Hand Operated, Astm D-4318/ Aashto T-89 (SO-311A)
• LIQUID LIMIT DEVICE, Electric, Astm D-4318/ Aashto T-89 (SO-311B)
• PLASTIC LIMIT TEST SET, Astm D-4318/ Aashto T-90 (SO-315)
• SHRINKAGE LIMIT TEST SET, Astm D-427/ Aashto T-92 (SO-320)
• HYDROMETER ANALYSIS TEST SET, Astm D-422/ Aashto T-88 (SO-330A)
• MECHANICAL END OVER END SHAKER, BS-1377 (SO-338)
• VACUUM STAND, With 6 Flask Capacity (SO-339A)
• SPECIFIC GRAVITY Heating Method (SO-340)
• SPECIFIC GRAVITY Vacuum Method, Astm D-854/ Aashto T-100 (SO-340A)
• SPECIFIC GRAVITY Vacuum Method, Astm D-854/ Aashto T-100 (SO-340B)
• COMPACTION TEST SET, Astm D-698/ D-1557/ T-99/ T-180 (SO-350)
• LABORATORY CBR TEST SET Electric Astm D-1883/ Aashto T-193 (SO-360A)
• LABORATORY CBR TEST SET, Astm D-1883/ Aashto T-193 (SO-360B)
• COMBINATION PERMEAMETER, Astm D-2434/ Aashto T-215 (SO-370)
• COMPACTION PERMEAMETER TEST SET 1/ 30 cu.ft (SO-390A)
• COMPACTION PERMEAMETER TEST SET 1/ 13.33 cu.ft (SO-395A)
• SAND CONE TEST SET, Astm D-1556/ Aashto T-191 (SO-400)
• SPEEDY MOISTURE TESTER, Aashto T-217 (SO-430)
• MOISTURE CONTENT TEST SET (SO-450)
• UNCONFINED COMPRESSION MACHINE, Astm D-2166/ Aashto T-208 (SO-500)
• UNCONFINED COMPRESSION MACHINE Electric, Astm D-2166/ Aashto T-208 (SO-500A)
• CONSOLIDATION TEST SET, Astm D-2435/ Aashto T-216 (SO-515)
• DIRECT SHEAR TEST SET, Astm D-3080/ Aashto T-236 (SO-525)
• ELECTRIC DIRECT SHEAR TEST SET, Astm D-3080/ Aashto T-236 (SO-525E)
• TRIAXIAL TEST SET/ CU, UU, CD test methode, Astm D-2850 (SO-600) Digital reading for PP value
• TRIAXIAL TEST SET/ CU, UU, CD test methode (SO-550), Astm D-2850 Mercury manometer reading for PP value
AGGREGATE EQUIPMENT ( Lab. Uji Bahan/ Mektan) :
• SAMPLE SPLITER 1/ 2inch, 12 holes, 1/ 2 inch chute width (AG-100)
• SAMPLE SPLITER 3/ 4 inch, 12 holes, 3/ 4 inch chute width (AG-101)
• SAMPLE SPLITER 1 inch, 12 holes, 1 inch chute width (AG-102)
• SAMPLE SPLITER 1-1/ 2, inch 12 holes, 1-1/ 2 inch chute width (AG-103)
• SAMPLE SPLITER 2 inch, 12 holes, 2 inch chute width (AG-104)
• SAMPLE SPLITER 2 1/ 2 inch, 12 holes, 2 1/ 2 inch chute width (AG-105)
• SAMPLE SPLITER 3" inch, 12 holes, 3 inch chute width (AG-106)
• GILSON SAMPLE SPLITTER, Varieble chute width, 1/ 2" increment (AG-111)
• PRECISSION SAMPLE SPLITTER, chute width 1/ 4" x 32 holes (AG-122)
• PRECISSION SAMPLE SPLITTER, chute width 1/ 4" x 16 holes (AG-123)
• LENGTH GAUGE BS-812 (AG-170)
• THICKNESS GAUGE BS-812 (AG-180)
• STANDAR SIEVE (Brass Round Sieve 8 inch Diameter)
• Sieve Analisis - Gradation Test
• SIEVE 4" ; mesh 101.6 mm opening, 8 inch dia. (AG-200A)
• SIEVE 3 1/ 2" ; mesh 88.9 mm opening, 8 inch dia.(201A)
• SIEVE 2 1/ 2" ; mesh 62.5 mm opening, 8 inch dia. (AG-203A)
• SIEVE 2" ; mesh 50.8 mm opening, 8 inch dia. (AG-204A )
• SIEVE 1 3/ 4" ; mesh 44.4 mm opening, 8 inch dia. (AG-205A)
• SIEVE 1 1/ 2" ; mesh 38.1 mm opening, 8 inch dia. (AG-206A)
• SIEVE 1 1/ 4" ; mesh 31.7 mm opening, 8 inch dia. (AG-207A)
• SIEVE 1" ; mesh 25.4 mm opening, 8 inch dia. (AG-208A )
• SIEVE 7/ 8" ; mesh 22.2 mm opening, 8 inch dia. (AG-209A)
• SIEVE 3/ 4" ; mesh 19.0 mm opening, 8 inch dia. (AG-210A)
• SIEVE 5/ 8" ; mesh 15.8 mm opening, 8 inch dia. (AG-211A)
• SIEVE 1/ 2" ; mesh 12.7 mm opening, 8 inch dia (AG-212A)
• SIEVE 7/ 16" ; mesh 11.1 mm opening, 8 inch dia. (AG-213A)
• SIEVE 3/ 8" ; mesh 9.5 mm opening, 8 inch dia. (AG-214A)
• SIEVE 5/ 16" ; mesh 7.9 mm opening, 8 inch dia. (AG-215A)
• SIEVE 1/ 4" ; mesh 6.3 mm opening, 8 inch dia. (AG-216A)
• SIEVE # 4; mesh 4.75 mm opening, 8 inch dia. (AG-218A)
• SIEVE # 8; mesh 2.36 mm opening, 8 inch dia. (AG-222A)
• SIEVE # 10; mesh 2.00 mm opening, 8 inch dia. (AG-223A)
• SIEVE # 12; mesh 1.70 mm opening, 8 inch dia. (AG-224A)
• SIEVE # 16; mesh 1.18 mm opening, 8 inch dia. (AG-226A)
• SIEVE # 20; mesh 0.850 mm opening, 8 inch dia. (AG-228A)
• SIEVE # 30; mesh 0.600 mm opening, 8 inch dia.(AG-230A)
• SIEVE # 40; mesh 0.425 mm opening, 8 inch dia. (AG-232A)
• SIEVE # 50; mesh 0.300 mm opening, 8 inch dia. (AG-234A)
• SIEVE # 60; mesh 0.250 mm opening, 8 inch dia. (AG-235A)
• SIEVE # 70; mesh 0.212 mm opening, 8 inch dia. (AG-236A)
• SIEVE # 80; mesh 0.180 mm opening, 8 inch dia. (AG-237A)
• SIEVE # 100; mesh 0.150 mm opening, 8 inch dia. (AG-238A)
• SIEVE # 120; mesh 0.125 mm opening, 8 inch dia. (AG-239A)
• SIEVE # 140; mesh 0.106 mm opening, 8 inch dia. (AG-240A)
• SIEVE # 170; mesh 0.090 mm opening, 8 inch dia. (AG-241A)
• SIEVE # 200; mesh 0.075 mm opening, 8 inch dia. (AG-242A)
• PAN & COVER; receiver with lid, 8 inch dia, (AG-250)
• STANDAR SIEVE ( Stainless Steel Round Sieve 8 inch Diameter)
• Sieve Analysis - Gradation Test (AG 300A up to AG 350)
• SIEVE SHAKER, Hand Operated (AG-510)
• SIEVE SHAKER, Electric (AG-515)
• ROTAP SIEVE SHAKER, Electric (AG-515)
• WOODEN STANDAR SIEVE (Stainlles Steel Round Sieve 8 inch Diameter)
• WOODEN SIEVE 1/ 4 Inch up to 4 Inch (mesh 6.3 mm up to mesh 101.6 mm opening)
• WOODEN SIEVE # 4; Mesh 4.75 mm opening
• WET WASHING SIEVE, # 200, 8" dia., 4" depth (AG-492)
• WET WASHING SIEVE, # 200, 8" dia., 8" depth (AG-493)
• ELONGATION INDEX BS-812 (AG-170)
• FLAKINESS INDEX BS-812 (AG-180)
• SAND EQUIVALENT TEST SET, Astm D-2419 (AG-600)
• SAND EQUIVALENT SHAKER, Astm D-2419/ Aashto T-176 (AG-610)
• BOTTLE ROLLER BS-812/ Astm C-117 (AG-621)
• LOS ANGELES ABRASION MACHINE, Astm C-131/ Aashto T-96 (AG-700)
• AGGREGATE IMPACT TEST, BS-812 (AG-750)
• AGGREGATE CRUSHING VALUE APPARATUS, BS-812 (AG-760)
• AGGREGATE CRUSHING VALUE APPARATUS (AG-760A)
• BULK DENSITY TEST SET, Astm C-29/ Aashto T-19 (AG-800)
• ABSORPTION OF FINE AGGREGATE TEST SET, Astm C-128/ Aashto T-84 (AG-810A)
• SPECIFIC GRAVITY & ABSORPTION OF COARSE AGGREGATE TEST SET, Mechanical Balance, Astm C-127/ Aashto T-85 (AG-825)
• SPECIFIC GRAVITY & ABSORPTION OF COARSE AGGREGATE TEST SET, Digital Balance, Astm C-127/ Aashto T-85 (AG-825)
• ORGANIC IMPURITIES TEST SET, Astm C-40/ Aashto T-21 (AG-910)
• SOUNDNESS TEST SET, Astm C-88/ Aashto T-104 (AG-920)
CEMENT EQUIPMENT (Lab. Uji Bahan/ Beton) :
• AIR PERMEABILITY OF PORLAND CEMENT BY FINENESS DEVICE, Astm C-204/ Aashto T-153 (CE-100)
• SPECIFIC GRAVITY OF HYDRAULIC CEMENT TEST, Astm C-188/ Aashto T-133 (CE-110)
• TIME OF SETTING OF HYDRAULIC CEMENT BY VICAT NEEDLE, Astm C-187/ C-191/ T-129/ T-131 (CE-120)
• COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTAR, Astm C-109/ Aashto T-106 (CE-160)
• COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTAR Electric, Astm C-109/ Aashto T-106 (CE-160A)
• COMPRESSION MACHINE 100 kN, Compressive Strength Cement Mortar, Astm C-109 (CE-170)
• COMPRESSION MACHINE 250 kN, Compressive Strength Cement Mortar, Astm C-109 (CE-175)
CONCRETE EQUIPMENT (Lab. Uji Beton/ Bahan / Bangunan) :
• CONCRETE CYLINDER MOLD (Silinder Cetakan Beton) 10 cm dia x 20 cm height (CO-300)
• CONCRETE CYLINDER MOLD (Silinder Cetakan Beton), 15 cm dia x 30 cm height (CO-301)
• CONCRETE CUBE MOLD (Kubus Cetakan Beton), 10 x 10 x 10 cm ( CO-311)
• CONCRETE CUBE MOLD (Kubus Cetakan Beton), 15 x 15 x 15 cm (CO-312)
• CONCRETE BEAM MOLD, 15 x 15 x 60 cm (CO-317 A)
• CONCRETE BEAM MOLD, 20 x 20 x 80 cm (CO-319 A)
• COMPRESSION MACHINE 1500 kN (Mesin Press Beton) , Hydraulic Hand Pump, Astm C-39 (CO-321.3)
• COMPRESSION MACHINE 2000 kN (Mesin Test Beton) , Hydraulic Hand Pump, Astm C-39 (CO-321.4)
• COMPRESSION MACHINE 3000 kN, Hydraulic Hand Pump Astm C-39 (CO-321.5)
• COMPRESSION MACHINE 1500 kN, Electric Hydraulic Pump Astm C-39 (CO-325.3)
• COMPRESSION MACHINE 2000 kN, Electric Hydraulic Pump, Astm C-39 (CO-325.4)
• COMPRESSION MACHINE 3000 kN, Electric Hydraulic Pump Astm C-39 (CO-325.5)
• UNIVERSAL TESTING MACHINE 1500 kN (Compression & Tensile) , Electric Hydraulic Pump, Astm C-39 (CO-320M)
• HYDRAULIC CONCRETE BEAM TESTING MACHINE, Astm C-78 (CO-330)
• MECHANICAL CONCRETE BEAM TESTING MACHINE, Astm C-78 (CO-351)
• COMPRESSION MACHINE 2000 kN, Electric Hydraulic Pump, Astm C-39 (CO-325.4SA)
• COMPRESSION MACHINE 2000 kN, Electric Hydraulic Pump, Astm C-39 (CO-325.4DA)
• COMPRESSION-TENSION MACHINE 1500 kN, Electric Hydraulic Pump, Astm C-39 (CO-320M)
• COMPACTING FACTOR APPARATUS, BS-1881 (CO-355)
• SLUMP TEST SET, Astm C-143/ Aashto T-119 (CO-370)
• VEBE TIME, BS-1881 ( CO-380)
• AIR CONTENT OF FRESH MIXED CONCRETE, Astm C-231/ Aashto T-152 (CO-400)
• VIBRATING TABLE (CO-410)
• VERTICAL CYLINDER CAPPING SET, Astm C-617 (CO-470)
• MODULUS OF ELASTICITY IN CONCRETE TEST SET (CO-500)
• SPLIT TENSILE TEST, BS-1881 (CO-525)
• CONCRETE TEST HAMMER Astm C-805 Proceq/ Original Schmidt® , Matest, Tecnotest, elcometer.
• CALIBRATION ANVIL, ASTM C-805 (CO-555)
• CONCRETE TEST HAMMER Type N (CO-550.1S)
• CONCRETE TEST HAMMER Type L (CO-550.2S)
• CONCRETE TEST HAMMER Type NR (CO-550.3S)
• CONCRETE TEST HAMMER Type N Digi-schmidt 2000 (CO-550.3S)
• DIGITAL CONCRETE TEST HAMMER Type N Digi-schmidt 2000 (CO-550.5S)
• SILVER SCHMIDT Type Pcn, UN, BN/ Proceq Concrete Test Hammer
• CALIBRATION ANVIL, ASTM C-805 (CO-555)
• CONCRETE CRACK DETECTION (CO-325UI) “ Ultrasonic Instrument†Concrete determination for Cavities, crack, defects due to fire and frost
• REBARS LOCATOR (CO-570S)
• PROFOSCOPE Rebars Detectors, Rebar detection, Measurement of Concrete cover
• PULL-OFF TESTER 6 or 16 kN with digital manometer (CO-550.8S)
• PULL-OFF TESTER 6 or 16 kN with Electronic Display Device
• BUILDING MOISTURE METERS (CO-5360BLD)
• ASPHALT/ CONCRETE CUTTER (CO-400DCC)
• CONCRETE VIBRATOR (CO-20EY)
• LABORATORY CONCRETE MIXER (CO-610)
ASPHALT EQUIPMENT (Lab. Uji Aspal/ Jalan Raya/ Transportasi) :
• SPECIFIC GRAVITY OF SEMI-SOLID BITUMINOUS MATERIALS (BI-100), Astm D-70/ Aashto T-228
• DISTILATION OF CUTBACK ASPHALTS (BI-110), Astm D-402/ Aashto T-78
• WATER CONTENT IN PETROLEUM PRODUCTS (BI-120), Astm D-95/ Aashto T-55
• SAYBOLT VISCOSIMETER (BI-150A), Astm D-402/ Aashto T-78
• ASTM THERMOMETER 17 C, 19 to 27 deg.C (GE-644.1)
• ASTM THERMOMETER 18 C, 34 to 42 deg.C (GE-644.2)
• ASTM THERMOMETER 19 C, 49 to 57 deg.C (GE-644.3)
• ASTM THERMOMETER 20 C, 57 to 65 deg.C (GE-644.4)
• ASTM THERMOMETER 21 C, 79 to 87 deg.C (GE-644.5)
• ASTM THERMOMETER 22 C, 95 to 103 deg.C (GE-644.6)
• DIGITAL ASPHALT THERMOMETER (GE-914TM)
• INFRARED THERMOMETERGE (GE-380ST)
• FLASH AND FIRE POINT BY CLEVELAND OPEN CUP (BI-200), Astm D-92/ Aashto T-48
• FLASH AND FIRE POINT BY CLEVELAND OPEN CUP (BI-200 A), Astm D-92/ Aashto T-48
• SOFTENING POINT TEST SET (BI-210), Astm D-36/ Aashto T-53
• LOSS ON HEATING/ THIN-FILM TEST (BI-220), Astm D-6/ D-1754, Aashto T-47/ T-179
• LABORATORY PENETRATION TEST SET (BI-230), Astm D-5/ Aashto T-49
• LABORATORY PENETRATION TEST SET (BI-230 A); Astm D-5/ Aashto T-49
• AUTOMATIC BITUMINOUS COMPACTOR (BI-325AAC), Astm D-5581, BS 598-107, EN 12697-30
• DUCTILITY OF BITUMINOUS MATERIALS TEST SET (BI-250), Astm D-113/ Aashto T-51
• PARTICLE CHARGE METER ( BI-260)
• CENTRIFUGE EXTRACTOR TEST SET (BI-300), Astm D-2172/ Aashto T-164
• CENTRIFUGE EXTRACTOR TEST SET (BI-300A), Astm D-2172/ Aashto T-164
• REFLUX EXTRACTOR TEST SET (BI-310), Astm D-2172/ Aashto T-164
• BITUMINOUS PENETRATION TEST SET (BI-230 A); Astm D-5/ Aashto T-49
• PORTABLE CORE DRILLING MACHINE (ZIZ-CF102)
• MARSHALL TEST SET (BI-320) Astm D-1559/ Aashto T-245
• AUTOMATIC ASPHALT COMPACTOR (BI-325AAC) Astm D-5581, BS 598-107, EN 12697-30
• PERCENTAGE REFUSAL DENSITY (BI-325PRD) BS 598-104; EN 12697-32
• CORE DRILLING TEST SET (BI-400)
• DIAMOND BIT (BI-406)
• DIAMOND CORE BIT (BI-406.4H)
• CORE DRILLING TEST SET (BI-400L)
• BENKLEMAN BEAM (BI-450)
• MOT STRAIGHT EDGE (BI-470)
• ASPHALT RECOVERY APPARATUS (BI-480)
MISCELLANEOUS :
• UNIVERSAL TESTING MACHINE 1000 kN, 2000 kN (Compression, Tensile, Bending and Shearing test)
• TENSILE TESTING MACHINE, test of PVC materials (MI-100)
• DIBBLE (TUGAL) MI-120
• RAIN GAUGE (MI-130)
• MORTAR MIXER 5, 10 Kg Capacity
GENERAL EQUIPMENT :
• PROVING RIN G, 100 kg capacity + Kalibrasi (GE-101.1)
• Proving Ring, 250 lbs capacity + Kalibrasi (GE-101.2)
• Proving Ring, 500 lbs capacity + Kalibrasi (GE-101.3)
• Proving Ring, 1.000 lbs capacity + Kalibrasi (GE-101.4)
• Proving Ring, 2.000 lbs capacity + Kalibrasi (GE-101.5)
• Proving Ring, 6.000 lbs capacity + Kalibrasi (GE-101.6)
• Proving Ring, 10.000 lbs capacity + Kalibrasi (GE-101.7)
• Dial Gauge - Indicator ( Mitutoyo, Teclock), 0.2 in. x 0.0001 in ( GE-130)
• Dial Gauge - Indicator (Mitutoyo, Teclock), 1.0 in. x 0.01 in (GE-131)
• Dial Gauge - Indicator (Mitutoyo, Teclock), 10 mm x 0.01 mm (GE-135)
• Dial Gauge - Indicator (Mitutoyo, Teclock) , 20 mm x 0.01 mm (GE-136)
• Dial Gauge - Indicator (Mitutoyo, Teclock), 30 mm x 0.01 mm (GE-137)
• Dial Gauge - Indicator (Mitutoyo, Teclock), 50 mm x 0.01 mm (GE-138)
• Magnetic Dial Holder ( GE-140)
• Ohaus CENT O-GRAM BALANCE, Timbangan 311 gr cap x 0.01 sensitivity (GE-150)
• Timbangan Ohaus - TRIPLE BEAM BALANCE (Ohaus, ADAM) ,
• Timbangan 2610 gr cap x 0.1 sensitivity (GE-152)
• Ohaus DIAL O- GRAM BALANCE, Timbangan 2610 gr cap x 0.1 sensitivity (GE-153)
• Ohaus HEAVY DUTY SOLUTION BALANCE, Timbangan 20 kg cap x 1 sensitivity (GE-157)
• PLATFORM SCALE (Nagata, AND) , 50 kg cap x 10 gr sensitivity ( GE-159)
• DIGITAL BALANCE ( AND) , 310 gr cap x 0.001 gr sensitivity (GE-160)
• DIGITAL BALANCE, 6100 gr cap x 0.1 gr sensitivity (GE-161)
• OVEN ( Memmert) , 14 litre, drying type (GE-171)
• OVEN ( Memmert) , 32 litre, drying type (GE-172)
• OVEN ( Memmert) , 39 litre, drying type (GE-173)
• OVEN ( Memmert) , 53 litre, drying type (GE-174)
• OVEN ( Memmert) , 108 litre, drying type (GE-175)
• OVEN ( Memmert) , 256 litre, drying type (GE-176)
• OVEN ( Memmert) , 416 litre, drying type (GE-177)
• OVEN ( Memmert) , 749 litre, drying type (GE-178)
• HOT PLATE, Single burner plate (GE-191)
• HOT PLATE, Double burner plate (GE-192)
• GLASS PLATE, 10 mm thick, 30 x 30 cm (GE-396)
• WATER BATH, COOLING SYSTEM
• BUTANE FIELD HEATER, BUNSEN BURNER, STATIF, TRIPOD STAND,
• GLASS CLAMP, ASBESTOS, WIRE GAUZE
• SQUARE PAN, 25 x 25 x 5 cm; 40 x 40 x 5 cm; 50 x 50 x 7.5 cm; 65 x 65 x 7.5 cm.
• RECTANGULAR PAN, 30 x 20 x 10 cm; 45 x 30 x 15 cm; 60 x 40 x 25 cm.
• THIN BOX, ROUND PAN; SAMPLE CAN
• MIXING BOWL, 10cm - 20cm - 24cm diameter.
• GRADUATED CYLINDER, Glass, 25 ml, 50 ml, 100 ml, 250 ml, 500 ml, 1000 ml capacity.
• GRADUATED CYLINDER, Plastic, 25 ml, 50 ml, 100 ml, 250 ml, 500 ml, 1000 ml capacity.
• VOLUMETRIC FLASK, 100 ml, 250 ml, 500 ml, 1000 ml capacity.
• BEAKER GLASS, 100 ml, 250 ml, 600 ml, 800 ml, 1000 ml capacity.
• ERLENMEYAR FLASK, 125 ml, 250 ml, 500 ml, 1000 ml, 2000 ml capacity.
• VACUUM FLASK, 125 ml, 250 ml, 500 ml, 1000 ml, 2000 ml capacity.
• DENSITY BOTTLE, Glass 50 ml - 100 ml capacity.
• SEPARATORY FUNNEL, Glass, 250 ml - 500 ml capacity.
• FILTER FUNNEL, Porcelain, 125 ml - 500 ml capacity.
• DESSICATOR, Non vacuum, silica gel, 21 cm -24 cm - 30 cm diameter.
• DESSICATOR, Vacuum type, silica gel, 21 cm -24 cm - 30 cm diameter.
• FUNNEL, plastic or glass, wide or narrow mouth.
• BURRETE, , 10 ml, 25 ml, 50 ml, 100 ml capacity.
• EVAPORATING DISH, 9 cm dia - 100 ml capacity; 12 cm dia - 250 ml capacity; 15 cm dia – 350 ml capacity; 17 cm dia., 500 ml capacity.
• MORTAR & PASTLE, 12 cm - 15 cm- 18 cm diameter.
• WASH BOTTLE, 250 ml - 500 ml - 1000 ml capacity.
• PIPETTE, 5 ml - 10 ml capacity
• CRUCIBLE, 13 ml - 18 ml - 25 ml - 40 ml capacity.
• THERMOMETER, range 0-50 deg.C; 0-100 deg.C; 0-150 deg.C; 0-200 deg.C; 0-300 deg.C.
• POCKET DIAL THERMOMETER, range 0 - 100; 0 - 200; 0 - 300 deg.C.
• DIAL THERMOMETER, range 0 - 100; 0 - 200; 0 - 300 deg.C.
• ASTM THERMOMETER 12 C, 20 to 102 deg.C / Specific Gravity (GE-641)
• ASTM THERMOMETER 63 C, 8 to 32 deg.C (GE-642)
• ASTM THERMOMETER 13 C, 155 to 170 deg.C / Loss on Heating (GE-643)
• ASTM THERMOMETER 15 C, 15 C, 2 to 80 deg.C / Softening Point (GE-646.1)
• ASTM THERMOMETER 16 C, 30 to 200 deg.C / Softening Point (GE-646.2)
• ASTM THERMOMETER 11 C, 6 to 400 deg.C / Open Flash (GE-648)
• ASTM THERMOMETER 7 C, 2 to 300 deg.C / Distilation (GE-649.1)
• ASTM THERMOMETER 8 C, 2 to 400 deg.C / Distilation (GE-649.2)
• MANOMETER, 25 kg/ cm2 capacity, 6" diameter (GE-670)
• MANOMETER, 60 kg/ cm2 capacity, 6" diameter (GE-671)
• MANOMETER, 150 kg/ cm2 capacity, 6" diameter (GE-672)
• MANOMETER, 250 kg/ cm2 capacity, 6" diameter (GE-673)
• MANOMETER, 300 kg/ cm2 capacity, 6" diameter (GE-674)
• MANOMETER, 500 kg/ cm2 capacity, 6" diameter (GE-675)
• MANOMETER, 700 kg/ cm2 capacity, 6" diameter (GE-676)
• MANOMETER, 1000 kg/ cm2 capacity, 6" diameter (GE-677)
• VACUUM MANOMETER, 4" dia. 0-76 cm HG (GE-679)
• VACUUM PUMP, Rotary type, 1/ 2 HP (GE-680)
• HYDRAULIC CYLINDER, 30 - 50 - 100 - 150 - 200 - Ton capacity.
• HYDRAULIC HAND PUMP, 10.000 psi, single acting (GE-690)
• HYDRAULIC HAND PUMP, 10.000 psi, double acting (GE-691)
• HYDRAULIC ELECTRIC PUMP, 10.000 psi, single acting (GE-694)
• HYDRAULIC ELECTRIC PUMP, 10.000 psi, double acting (GE-695)
• HYDRAULIC HOSE, 100 - 200 cm length, 10.000 psi (GE-697)
• STOP WATCH, 60 sec sweep x 30 min (GE-700)
• STOP WATCH, 30 sec sweep x 30 min (GE-701)
• VERNIER CALIPER, 6 inch (150 mm) range measuring (GE-710)
• VERNIER CALIPER, 8 inch (200 mm) range measuring (GE-711)
• VERNIER CALIPER, 10 inch (250 mm) range measuring (GE-712)
• VERNIER CALIPER, 12 inch (300 mm) range measuring (GE-713)
• Levels, Open End Wrench, Ring Spanner, Allen Key, Pipe Wrench, Strap Wrench, Adjustable
• Wrench, Rubber Gloves, Leather Gloves, Asbestos Gloves, Quatering Canvas.
• Round Scoop, Flat Scoop, Scoop Pan, Aggregate Scoop. Round Scoop, Flat Scoop, Scoop Pan,
• Aggregate Scoop.Spatula, Scraper, Wire Saw, Spoon, Trowel, Gardener' s Type Trowel, Chissel,
• Ruler, Rubber Mallet, Steel Wire Brush, Brass Wire Brush, Soft Brush, Tamping Rod, Straight Edge. MORTAR MIXER, Bench model; 5 litre capacity.
MINING & COAL EQUIPMENT (Mesin Preparation & Pengujian Batubara/ Laboratorium Batubara/ Lab. Nikel)
• JAW CRUSHER 5" x 8" (ME-100)
• JAW CRUSHER 2 3/ 8" x 8" (ME-130)
• JAW CRUSHER 6.5" x 8" (ME-110)
• LAB TYPE JAW CRUSHER (ME-140)
• SINGLE ROLL CRUSHER 10" (ME-150)
• DOUBLE ROOL CRUSHER 10" x 6" (ME-160)
• DOUBLE ROOL CRUSHER 20" (ME-165)
• ROTARY SAMPLE DEVIDER 15 KG (ME-170S1)
• ROTARY SAMPLE DEVIDER 30 KG (ME-170S2)
• ROTARY SAMPLE DEVIDER 50 KG (ME-170S3)
• ROTARY SAMPLE DEVIDER 120 KG (ME-170S4)
• RO-TAP SIEVE SHAKER 8" (ME-180)
• RO-TAP SIEVE SHAKER 12" (ME-185)
• SHAKING TABLE / Table Consentrator / Meja Goyang (ME-190)
• SAMPLE SPLITTER, Variable chute ( alumunium) width 1/ 2 inch (1/ 2†, 1†, 1 ½ †, 2†, etc)
• SAMPLE SPLITTER, Stainlles steel, chute width 1/ 4 inch, 32 holes, with scoop & pan
• SAMPLE SPLITTER, Stainlles steel, chute width 1/ 2 inch, 12 holes, with scoop & pan
• SAMPLE SPLITTER, Stainlles steel, chute width 3/ 4 inch, 12 holes, with scoop & pan
• SAMPLE SPLITTER, Stainlles steel, chute width 1" inch, 12 holes, with scoop & pan
• DISC PULVERIZER (ME-210)
• SUPER CRUNCH (ME-220)
• BALL MILL (ME-230BM)
• HAMMER MILL (ME-240)
• GRINDING MILL (ME-245)
• RAYMOND MILL (ME-250)
• HARD GROVE GRINDABILITY (ME-280)
• BIG DRYING SHED 180 x 120 x 550 cm (ME-290)
• HOT PLATE (ME-330)
• DRYING OVEN 120 X 110 X 220 cm (ME-350)
• CUTTING MESIN (ME-400)
• LAB. PULVERIZER Pneumatic (ME-200P)
• LAB. PULVERIZER Manual (ME-200A)
• GRINDING MILL (ME-245)
• DISC MILL (ME-210)
• V-MIXER (ME-175)
• FLOW TEST (ME-160AM)
• GRINDING HEAD SET C-500
• GRINDING HEAD SET C-1000
• GRINDING HEAD SET C-2000
• BIG DRYING SHED
• DUST COLLECTOR
• HOT PLATE
• OVEN ROTARY
Part & Accessories :
• JAW FACE 5" X 8"
• JAW FACE 5" X 8" ( anganese)
• JAW FACE TYPE LAB
HUBUNGI LINE PERUSAHAAN KAMI :
- Untuk Informasi dan Pemesanan : 0818.569.876.
- Customer Service : 085.2221.77772 ( 24 hours)
- Cataloque, informasi kerjasama dan dukungan pengadaan : deddy_marketing1mbt@yahoo.co.id
|
Prioritas IndotradeTahun ke-17
ALAT TEKNIK SIPIL ( Distributor & Agen utama brand MBT) 
Ke Menu Anggota
© 2024 Indotrade.co.id. Hak Cipta Dilindungi Undang-undang.
